A zero-config, end-user friendly UDP logger component for ESP-IDF.

What you get

✅ Only one line in your firmware:

#include "esp32_udp_logger.h"

Nothing else required.

Once the ESP32 gets an IP (Wi‑Fi STA or Ethernet):

• All ESP_LOGx() output is mirrored to UDP (original output stays active too)
• Logs are sent by default to UDP broadcast on port 9999
• Each device gets a unique hostname: esp32-udp-logger-XXXX.local
• The device listens for commands on UDP port 9998 (bind-to-me selection)

Default ports

• TX (logs): 9999
• RX (commands): 9998

You can change these via menuconfig: Component config → esp32-udp-logger.

For apps that already initialize networking, you can disable internal netif init: Component config → esp32-udp-logger → Call esp_netif_init() in esp32_udp_logger_autostart().

---

Quick start (single device)

1) Add the component

Option A — local component

Copy the folder esp32-udp-logger/ into your project:

your_project/
  components/
    esp32-udp-logger/    <- copy this folder
  main/
  CMakeLists.txt
  ...

Option B — ESP Component Registry

Publish it, then in your project's idf_component.yml add:

dependencies:
  YOUR_NAMESPACE/esp32-udp-logger: "^1.0.0"

2) Add one include line to your code

Add this once anywhere in your project (for example in main/app_main.c):

#include "esp32_udp_logger.h"

That’s it.

3) Build & flash

idf.py build flash monitor

(You can close the serial monitor after Wi‑Fi is up; UDP logging keeps working.)

4) Receive logs on your PC

macOS / Linux (netcat)

nc -klu 9999

Windows

PowerShell (built-in on many systems):

# Simple UDP listener using .NET
$port=9999
$udp = New-Object System.Net.Sockets.UdpClient($port)
$ep  = New-Object System.Net.IPEndPoint([System.Net.IPAddress]::Any,0)
Write-Host "Listening on UDP $port ..."
while($true){
  $bytes = $udp.Receive([ref]$ep)
  $text  = [System.Text.Encoding]::UTF8.GetString($bytes)
  Write-Host $text
}

Tip: on Windows you can also use Wireshark, or install ncat (Nmap) for a netcat-like listener.

---

Multiple ESP32 devices: select one ("bind-to-me")

If you have multiple ESP32 devices broadcasting logs, you can select one device and make it send logs only to your PC (unicast).

1) Find the device hostname

Each device sets a unique hostname like:

• esp32-udp-logger-7A3F.local
• esp32-udp-logger-19B2.local

(XXXX are the last bytes of the MAC.)

2) Start your receiver on your PC

nc -klu 9999

3) Bind one device to your PC

You send a UDP command to port 9998 of the device:

macOS / Linux

echo "bind YOUR_PC_IP 9999" | nc -u -w1 esp32-udp-logger-7A3F.local 9998

Windows (PowerShell)

$device="esp32-udp-logger-7A3F.local"
$rxPort=9998
$pcIp="YOUR_PC_IP"
$txPort=9999
$udp = New-Object System.Net.Sockets.UdpClient
$udp.Send([Text.Encoding]::UTF8.GetBytes("bind $pcIp $txPort"), ("bind $pcIp $txPort").Length, $device, $rxPort) | Out-Null
$udp.Close()

After binding:

• that ESP32 will send logs unicast to your PC
• optionally turn off broadcast for that device:

echo "broadcast off" | nc -u -w1 esp32-udp-logger-7A3F.local 9998

4) Status / Unbind

Status:

echo "status" | nc -u -w1 esp32-udp-logger-7A3F.local 9998

Unbind (back to broadcast):

echo "unbind" | nc -u -w1 esp32-udp-logger-7A3F.local 9998

---

Super easy mode: cross-platform CLI (recommended)

This repo includes a Python CLI that works on macOS / Linux / Windows.

Install

python -m pip install zeroconf

List devices

python tools/esp32_udp_logger_cli.py list

Interactive picker

python tools/esp32_udp_logger_cli.py pick

Bind device

python tools/esp32_udp_logger_cli.py bind esp32-udp-logger-7A3F

Listen logs (built-in)

python tools/esp32_udp_logger_cli.py listen --port 9999

---

Commands reference (UDP RX port 9998)

Commands are simple ASCII:

• bind <ipv4> <port> → switch to unicast destination
• unbind → switch back to broadcast
• broadcast on|off → enable/disable broadcast sending
• status → get current mode + drop count

Example:

echo "bind 192.168.1.10 9999" | nc -u -w1 esp32-udp-logger-7A3F.local 9998

---

Troubleshooting

I see no logs

• Make sure your ESP32 actually has Wi‑Fi/Ethernet and got an IP
• Make sure your PC is on the same subnet (broadcast is subnet-local)
• Try the Python listener:

  python tools/esp32_udp_logger_cli.py listen
  

Crash/assert around socket creation (Invalid mbox)

If your app already sets up networking/LwIP, disable: Component config → esp32-udp-logger → Call esp_netif_init() in esp32_udp_logger_autostart().

Also ensure LwIP allows enough UDP sockets for your app + logger. This component uses two UDP sockets (TX + RX), so increase: Component config → LWIP → UDP → The maximum number of active UDP "connections" (for example 2 or more).

list shows no devices

mDNS can be blocked:

• macOS: usually works out of the box
• Linux: ensure Avahi is running (common on desktop distros)
• Windows: allow Python through firewall on Private networks

I have Wi‑Fi but broadcast doesn’t arrive

Some networks block broadcast/multicast. In that case:

• bind the device to your PC by IP (unicast):

  python tools/esp32_udp_logger_cli.py bind esp32-udp-logger-7A3F --pc-ip YOUR_PC_IP
  

• or update your router/AP settings.

---

License

MIT