Mac

February 15, 2026 · View on GitHub

The best laptop money can buy:

https://www.apple.com/uk/macbook-pro/

If you don't have an M3 Pro / Max - you're missing out on an excellent (but overpriced) machine.

On balance of price vs performance the Macbook Air M3 is excellent, and even thinner and lighter than the Macbook Pro - a real joy to use. Even when you're using more RAM than the physical 16GB max and swapping, the performance is still so good you don't notice significant performance degradation for most usage, even when using heavyweight IDEs like IntelliJ.

WARNING: Battery Life

Mac battery runs hotter during charging

Ensure it is on a table and not heat capturing linen like you bed, especially if travelling.

Do not let your Macbook Pro get hot it will destroy the battery!!

Within a few weeks of digitial nomadding working on beds with my laptop on the bed cover, I had degraded the battery of my new Macbook Pro M3 Max to 85%, and even after being more careful, after a year it was down to 79%.

Battery Health 85%

Performance Falls through the floor on last 5-10% of battery life

This screenshot from Stats Bar shows why - it's using only Efficiency Cores rather than Performance Cores:

Mac CPU on low battery

Terminal

This is where you should be spending your life if you're a techie, with a browser to supplement referencing documentation.

  • $COLUMNS
    • 179 column width on my MacBook Pro 13" terminal
    • 204 on my MacBook Pro Retina 15" terminal
    • 215 on my Macbook Pro M3 2023 terminal - resolution gets better over time

Homebrew - Package Management

The best most widely used package manager for Mac.

See the Homebrew.md page for how to use it and great package lists I've spent years discovering and building up.

Mas - App Store Apps Management

Command line interface to the macOS App Store.

See the Mas page for how to install and use it.

Activity Monitor

See your CPU, RAM, Disk, Network and Energy usage of applications.

Sorting by CPU and RAM descending on their tabs is usually your first port of call.

To open Activity Monitor you can type Cmd-Space to open Spotlight search bar and the start typing Activity Monitor to find it and hit enter to open it.

On the command line you can also just run this:

open -a "Activity Monitor"

Force Quit Applications

You can use Activity Monitor above or bring up the Force Quit Applications dialogue box using this key combo:

Cmd + Option + Esc

Stats Bar

Stats gives many nice toolbar stats on your Mac's performance for:

  • CPU
  • GPU
  • RAM
  • Disk
  • Network
  • Battery
brew install stats

open -a "Stats"

Battery even tells you:

  • time to discharge
  • time to charge
  • number of charge cycles
  • battery health %
  • remaining charge / capacity in mAh (the capacity decreases as the battery health degrades - this is very useful to see)
  • which apps which are consuming a lot of energy for you to kill them if you're not needing them, helping your battery life when on the move

Start Stats.app at login - configure this in its settings or run this command to do it automatically:

osascript -e 'tell application "System Events" to make login item at end with properties {path:"/Applications/Stats.app", hidden:false}'

Pingr

Another useful menu app for constant wifi network monitoring for those unreliable hotel wifis:

https://getpingr.app/

Better than leaving a ping running in a terminal.

This isn't available in Homebrew unfortunately as of time of writing so you actually have to click through and install it manually and then click the menu bar drop down to have it start automatically at login.

The Stats bar's network tool gives far more detailed info such as connectivity history graph, latency, bandwith usage and per app network breakdowns. I like the green dot item, but for the graph directly in menu bar, this app is nice.

Flux

Flux dims your display to remove blue light that keeps you awake.

brew install --cask flux-app

Start Flux:

open -a Flux

Rearrange Status Bar Icons

Now 14" Macbook Pros are powerful enough, but the screen space is very limited and you lose the top middle for the camera you end up losing icons behind the camera portion of the screen.

Rearrange your icons to put the most important and frequently used icons to the left while leaving icons you rarely click on like Google Drive to the left to be pushed underneath the camera.

To rearrange icons:

Cmd + Click + drag each icon to where you want it

Reducing Desktop Workspaces

If like me, you hate the time lost in graphics sliding effect from one desktop workspace to another, especially caused by apps like Windows Virtual Desktop in Remote Desktop opening to full screen, and just prefer good old fashioned Cmd-Tab, then you can remove the extra workspaces as described here by pressing F3 and then hovering on and clicking the X to delete the extra workspaces.

Unfortunately, Remote Desktop still seems to slide and send to fullscreen in another temporary desktop workspace.

Sending Control-Alt-Delete to Windows through Remote Desktop

Fn + Control + Option + Delete

Virtualization

If you need to run some Windows or Linux on your Mac.

Use UTM as a user friendly frontend to Qemu virtualization on Apple Silicon chips.

Use Virtualbox if you're still on older x86_64.

You can also use Multipass.

See Virtualization page.

Anti-Virus

macOS has some built-in malware protection via XProtect;

https://support.apple.com/en-ae/guide/security/sec469d47bd8/web

Free Anti-Virus for Mac:

  • Avast - easy click install, follow instructions to grant permissions
  • AVG Free - similar to above, can only install one of AVG or Avast as they conflict and are owned by the same company
  • Avira - easy click install, follow instructions to grant permissions then run a deep scan
  • ClamAV - free open-source command line anti-virus
    • ClamXAV - proprietary, developed by another company on top of ClamAV, with an added GUI and scheduling, more user friendly

ClamAV Setup

https://docs.clamav.net/manual/Installing.html

brew install clamav

Description of components:

https://docs.clamav.net/manual/Usage.html

cd /opt/homebrew/etc/clamav/

If DevOps-Bash-tools is cloned to $HOME/github, link to its config, otherwise download it from GitHub.com:

for x in freshclam.conf clamd.conf; do
    if test -f ~/github/bash-tools/configs/"$x"; then
        ln -sv ~/github/bash-tools/configs/"$x" .
    else
        wget -nc "https://raw.githubusercontent.com/HariSekhon/DevOps-Bash-tools/refs/heads/master/configs/$x"
    fi
done

Verify configs:

clamconf

Start a manual freshclam foreground run to download the anti-virus signatures:

freshclam

If this succeeds, start freshclam as a background service:

freshclam -d

Start the background ClamAV daemon:

sudo brew services start clamav

The daemon is owned by root, so is its socket, so you need to sudo calls to access its socket for clamd to receive commands:

sudo clamdscan "$file"

Monitor ClamD instances resource usage, jobs queued and signature databases loaded in an ncurses style interactive terminal output

sudo clamdtop

Press q to quit / exit.

Standalone scanning without going through clamd:

clamscan "$file"

clamscan .

clamscan --recursive .

Raycast

Shortcut to everything.

Use as a drop in replacement for Spotlight which is full of garbage results like web pages in recent versions of Mac.

macOS power users often switch to Raycast or Alfred to use as app launchers as they are more predictable and respect local app priority rather than Spotlight which has been ruined trying to be a universal search usually resulting in poor results not giving you the local app you want to launch.

See Raycast page for installation and usage instructions as well as some useful extensions.

Alfred

More mature app launcher replacement for Spotlight.

More configurable and extensible than Raycast.

The search bar looks simpler than Raycast, but has more options under the hood with workflows and powerpacks.

Install Alfred:

brew install --cask alfred

Start Alfred in the background:

open -a "Alfred 5"

or in case the version number changes:

open -a "$(echo /Applications/Alfred\ *.app)"

Launch Alfred search bar:

Option + Space

AppleScript

Applescript sucks by comparison to Bash, and the debugging is even worse - from a trivial 10-20 line script you can get an error like this:

/get_application_names.scpt:882:889: script error: Expected “from”, etc. but found identifier. (-2741)

Line number 882:889 in a 20 line script?? Good luck finding the offending line. Now imagine that was a 100 or 1000 line script. Debugging Hell.

Still, there are some macOS UI related things for which this is the native code, see some such scripts under the applescript/ directory in my DevOps-Bash-tools repo which has many more Bash scripts that work on macOS and a bit of Python with the Quartz library for macOS:

Readme Card

Commands

A list of commands is provided at https://ss64.com/mac/.

Spotlight - Search for or Open anything

Cmd-Space - opens Spotlight search (or preferably Raycast if you followed the section above) to auto-complete and open anything quickly.

If this doesn't find an app which you know is there such as typing Spotify only returns Google Chrome or other wrong results despite confirming that /Applications/Spotify.app exists, then see Spotlight Search failing to find App in the Troubleshooting section.

Open URL from Terminal output

Cmd + Click on the URL.

Open

Open a file / folder / URL / Application. Use -a to select which app to use to open it. Use -e to edit the file in TextEdit.

Open URL in the default web browser

open https://google.com

Open current directory in Finder

open .

Open image in the default app (usually Preview)

open file.jpg

You can also drag to the Terminal to paste a file or directory's path, or right-click copy and paste into the terminal to get its path on your command line.

Show the File in Finder

If you have a big directory listing, sometimes it's easier to just

open -R "$file"

This will open Finder with the file highlighted.

Check default Application for a given file type

brew install duti

Check default Application for a given file type (eg .avi or .svg):

duti -x avi

duti -x svg

Change the default Application for a given file type

Set VLC to open AVI files

Check the ID of the app you want to set it to:

osascript -e 'id of app "VLC"'

output:

org.videolan.vlc

Change all .avi files to be opened by VLC instead of the default QuickTime Player which will fail to open them:

duti -s org.videolan.vlc avi all
Set Chrome to open SVG files

Change all .svgfiles to be opened by Google Chrome which is much faster for viewing than whatever heavyweight image editing application it is already set to (eg. Gimp or Inkscape):

duti -s com.google.Chrome public.svg-image all

Open an Application from the command line

Use the name as seen under /Applications/ without the .app extension which is optional:

open -a "Google Chrome"

open -a "SQLDeveloper"

open -a "DBeaver"

Clipboard

Copy from stdin to clipboard:

pbcopy < input.txt

Paste from clipboard to stdout:

pbpaste > output.txt

System Information

You may want to put the next couple of commands in initial debug steps for your Mobile iOS builds:

Model:

sysctl -n machdep.cpu.brand_string

Apple M3 Max

Specs Summary:

system_profiler SPHardwareDataType

Hardware:

    Hardware Overview:

      Model Name: MacBook Pro
      Model Identifier: Mac15,8
      Model Number: Z1AU001K1B/A
      Chip: Apple M3 Max
      Total Number of Cores: 16 (12 performance and 4 efficiency)
      Memory: 128 GB
      System Firmware Version: nnnnn.nn.nn
      OS Loader Version: nnnnn.nn.nn
      Serial Number (system): xxxxxxxxxx
      Hardware UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
      Provisioning UDID: xxxxxxxx-xxxxxxxxxxxxxxxx
      Activation Lock Status: Enabled

RAM:

system_profiler SPMemoryDataType

Disk Info:

diskutil list

system_profiler SPStorageDataType

USB Info (for external USD backup disks):

system_profiler SPUSBDataType

Graphics card:

system_profiler SPDisplaysDataType

Network info:

system_profiler SPNetworkDataType

Screenshots

Set Screenshot Location

Set screenshots to go to a dedicated folder:

defaults write com.apple.screencapture location -string ~/Desktop/Screenshots

This is cleaner than having them all over your Desktop background and easier to search for them (hint: organize the ~/Desktop/Screenshots folder by date).

Pre-create the directory:

mkdir -v ~/Desktop/Screenshots

Set the Screenshots directory as a list view

osascript -e '
tell application "Finder"
    activate
    open POSIX file "'"$HOME/Desktop/Screenshots"'"
    delay 1
    set the windowRef to Finder window 1
    set current view of the windowRef to list view
end tell'

Then click the Date Modified column header at the top to make your recent screenshots come to the top to be easy to find.

(can't find a command line way to set the folder to sort by date. Add here if you know how)

Drag the Screenshots directory to the left-hand Favourites panel for quick easy access in future.

Screenshot the Whole Screen

Cmd + Shift + 3

Screenshot a Selection - Drag a Rectangle

Switches to a cross-hair to drag to what you want to screenshot.

Cmd + Shift + 4

More details on Mac's native Screen Capture tool is here.

The Screenshot.app

The Screenshot.app in the Utilities folder is easy to use.

You can open it with the key combination:

Cmd + Shift + 5

or this command:

open /System/Applications/Utilities/Screenshot.app

or

open -a Screenshot

The ScreenCapture CLI

You may be prompted to allow Terminal to record the screen under Privacy & Security -> Screen Recording the first time - it'll tell you that you have to restart the Terminal, but it worked for me without a restart.

Switches to select window to capture:

screencapture -W /tmp/screenshot.png

Interactive mode with full toolbar, same as the Screenshot.app:

screencapture -i -U /tmp/screenshot.png

Video recording mode for 10 seconds (without -V it will record until you Ctrl-c it):

screencapture -v -V 10 /tmp/videocapture.mp4

So many great options from delayed screenshots, copy to clipboard, open in Preview, capture a coordinate rectangle (great for automation!), see:

screencapture --help

Screen Recording

Open the Screenshot.app using key combination:

Cmd + Shift + 5

or this command:

open /System/Applications/Utilities/Screenshot.app

or

open -a Screenshot

Click Record Entire Screen or Record Selected Portion.

This will create a .mov file in your screenshots directory (~/Desktop by default unless you've Set Screenshot Location).

Share this with tech support without breaking your email storage capacity by using a file upload site such as https://0x0.st.

More details on Mac's native Screen Capture tool is here.

Alternatively you can do this from the command line using the screencapture command as shown in The ScreenCapture CLI section above.

Another alternative is to use the QuickTime app, which gives you the same rectangle selection for video recording as the Screenshot app does.

Start the QuickTime player:

open -a "QuickTime Player.app"

And then select File -> New Screen Recording or use shortcut Control + Command +N.

DNS

Show DNS Settings

scutil --dns

Set DNS Servers

Sometimes you want to use public DNS servers for better performance than the local DHCP given ones:

sudo networksetup -setdnsservers en0 4.2.2.1 4.2.2.2

To set back to DHCP DNS servers, just clear the list:

sudo networksetup -setdnsservers en0 "Empty"

In DevOps-Bash-tools the shell has a function dhcpdns to do this for all network interfaces and remove the DNS search domains since you should inherit them from DHCP and not leak those FQDN searches to the internet if on public networks.

Set DNS Search Domain

sudo networksetup -setsearchdomains en0 mydomain.com

In DevOps-Bash-tools the shell has a function set_dns to do this for all network interfaces to make this easier.

You should see these search domains appear in the class unix file /etc/resolv.conf managed by apple networking.

To remove DNS search domains:

sudo networksetup -setsearchdomains en0 "Empty"

or clear_dns_search function in DevOps-Bash-tools to do this for all interfaces.

Set Hostname

hostname=whitestar

sudo hostname "$hostname"
sudo scutil --set HostName      "$hostname"
sudo scutil --set ComputerName  "$hostname"
sudo scutil --set LocalHostName "$hostname"

scutil --get HostName
scutil --get ComputerName
scutil --get LocalHostName

Flush the DNS Cache

dscacheutil -flushcache
sudo killall -HUP mDNSResponder

Network Quality

Built-in available in macOS Monterey or later:

networkquality

==== SUMMARY ====
Uplink capacity: 68.173 Mbps
Downlink capacity: 77.023 Mbps
Responsiveness: Low (322.581 milliseconds | 186 RPM)
Idle Latency: 204.167 milliseconds | 294 RPM

Wifi

Get Current Wifi Network Name

networksetup -getairportnetwork en0 | awk -F': ' '{print \$2}'

Get Current Wifi Network Password

Prompts with a UI pop-up for administrative access to the system's keychain (sudo doesn't prevent this unfortunately):

security find-generic-password -g -w -D "AirPort network password" \
    -a "$(networksetup -getairportnetwork en0 |
          awk -F': ' '{print \$2}')"

List all Configured Wifi Networks

networksetup -listpreferredwirelessnetworks en0 |
sed '/Preferred networks on/d;
     s/^[[:space:]]*//' |
sort -f

Say - text-to-speech

Make your Mac speak.

I used this to impress my kids, or even send a message from my loft study to my living room computer by running say over an SSH login to the computer downstairs for them to hear!

say "Daddy is the greatest"

You can also pipe in text:

echo "Daddy is the greatest" | say

Try different voices, list them like this:

say -v ?

Speak from a text file and save it to an audio file:

say -f words.txt -o myaudioclip.aiff

Finding Files - Spotlight Search and Index Management

The equivalent of locate on Linux, uses the Spotlight index:

mdfind [-onlyin /path/to/directory] [-name "$filename"] "$term"

Check an app like Whatsapp is in the Spotlight index:

app=WhatsApp

mdfind "kMDItemKind == 'Application' && kMDItemFSName == '$app.app'"

Erase and rebuild the Spotlight index:

mdutil -E

Disable Spotlight indexing:

mdutil -a -i off

Enable Spotlight indexing:

mdutil -a -i on

Check indexing status:

mdutil -s /

Check indexing status for a specific folder (perhaps after disabling indexing on large or sensitive folders):

mdutil -s ~/Downloads

Power Management

Show Power Management Settings

pmset -g

System-wide power settings:
Currently in use:
 standby              1
 Sleep On Power Button 1
 hibernatefile        /var/vm/sleepimage
 powernap             1
 networkoversleep     0
 disksleep            10
 sleep                0 (sleep prevented by coreaudiod, coreaudiod, sharingd, powerd)
 hibernatemode        3
 ttyskeepawake        1
 displaysleep         180
 tcpkeepalive         1
 powermode            0
 womp                 1

Show Power Status, Batteries & UPS

pmset -g ps

Now drawing from 'AC Power'
 -InternalBattery-0 (id=nnnnnnnn)       86%; charging; 0:35 remaining present: true

Show Power Adapter Details

Only on Macbook / Macbook Pro:

pmset -g ac

Output depends on whether you're plugged into AC power or not:

No adapter attached.

or

 Wattage = 94W
 Current = 4690mA
 Voltage = 20000mV
 AdapterID = nnnnn
 Manufacturer = Apple Inc.
 Family Code = 0xe000400a
 Serial String = xxxxxxxxxxxxxxxxx
 Adapter Name = 96W USB-C Power Adapter
 Hardware Version = 1.0
 Firmware Version = 01090057

Sleep Immediately

Put the machine to sleep immediately using this command:

sudo pmset sleepnow

Prevent Sleep

sudo caffeinate -i

Prevent sleep, but only if on AC power:

sudo caffeinate -s

Packages

Packages installed via native .pkg installers.

Install Package

sudo installer -pkg ~/Downloads/"$name".pkg -target /

Automating Installer Choices

To avoid pop-ups for things like CI/CD:

installer -showChoicesXML -pkg "$name".pkg |
tee choices.xml

This is a plist xml file. Edit it:

"$EDITOR" choices.xml

Then re-run the installer with it:

sudo installer -applyChoiceChangesXML choices.xml -pkg "$name".pkg

Inspect Package Contents Before Installing

pkgutil --expand ~/Downloads/"$name".pkg /tmp/pkg_contents

Then just browse the /tmp/package_contents/... which may look similar to this:

tree /tmp/pkg_contents

/tmp/pkg_contents
├── Distribution
├── Resources
│   ├── ixguard-white.png
│   └── ixguard.png
└── ixguard.pkg
    ├── Bom
    ├── PackageInfo
    ├── Payload
    └── Scripts
        ├── postinstall
        └── preinstall

4 directories, 8 files

List Installed Packages

List all .pkg installations:

pkgutil --pkgs | sort

This will be a long list of inverse domains for each package, such as:

com.amazon.aws.cli2
...
com.apple.pkg.CLTools_Executables
com.apple.pkg.CLTools_SDK_macOS13
com.apple.pkg.CLTools_SDK_macOS14
com.apple.pkg.CLTools_SwiftBackDeploy
com.apple.pkg.CLTools_macOS_SDK
...
com.apple.pkg.Xcode
...
com.google.drivefs.arm64
com.google.drivefs.shortcuts
...
com.guardsquare.ixguard
...
com.internet.wifispeed.speedtest
com.keepersecurity.commander.binary
com.keepersecurity.commander.launcher
...
com.microsoft.powershell
com.microsoft.rdc.macos
com.microsoft.teams
com.microsoft.teams2
com.ookla.speedtest-macos
com.openspeedtest.server
com.paloaltonetworks.globalprotect.pkg
...
com.vagrant.vagrant
...
net.whatsapp.WhatsApp
org.openvpn.client.pkg
org.openvpn.client_framework.pkg
org.openvpn.client_launch.pkg
org.openvpn.client_uninstall.pkg
org.openvpn.helper_framework.pkg
org.openvpn.helper_launch.pkg
ru.keepcoder.Telegram
us.zoom.pkg.videomeeting

Launchctl

This accesses launchd, Mac's init script equivalent.

See which launchd scripts are loaded:

launchctl list

Stop and unload script, add -w to remove it from the boot sequence:

sudo launchctl unload [path/to/script]

Launch scripts are found in the following locations:

~/Library/LaunchAgents
/Library/LaunchAgents
/Library/LaunchDaemons
/System/Library/LaunchAgents
/System/Library/LaunchDaemons

Launchd documentation

Blog post on cool things launchd can do, like watching and executing on files that are dropped into directories.

Start At Login

See which apps are configured to start at login:

osascript -e 'tell application "System Events" to get the name of every login item'

You should see a selection of apps:

Google Drive, ProtonVPN, WhatsApp, Stats, Terminal, SanDiskSecurityHelper, Flux, Hammerspoon

Add an app to start at login:

osascript -e 'tell application "System Events" to make login item at end with properties {path:"/Applications/Hammerspoon.app", hidden:false}'

Ignore this quirky output:

login item UNKNOWN

This does work, which you can verify by running the above osascript command again to see it's in the list of login items.

You can also see this in the Mac UI of Settings Settings -> General -> Login Items (Ventura / Sonoma):

open "x-apple.systempreferences:com.apple.LoginItems-Settings.extension"

or System Preferences -> Users & Groups -> Login Items (Monterey / Big Sur):

open "x-apple.systempreferences:com.apple.preference.users?LoginItems"

To add it if not already added:

osascript <<EOF
tell application "System Events"
    if not (exists login item "Hammerspoon") then
        make login item at end with properties {path:"/Applications/Hammerspoon.app", hidden:false}
    end if
end tell
EOF

Disk Management

Disk Utility

Using graphical Disk Utility is easiest:

open -a 'Disk Utility'

Disk Space Analysis

Mac built in System Settings -> General -> Storage will give a good high-level overview of what is taking up your disk space:

open "x-apple.systempreferences:com.apple.settings.Storage"

You can see this Apple support article on optimizing space.

My favourite of all time is Disk Inventory X:

brew install disk-inventory-x

open -a 'Disk Inventory X' /

GrandPerspective is another similar GUI disk space analysis app:

brew install --cask grandperspective

open -a GrandPerspective /

OmniDiskSweeper is another option:

brew install --cask omnidisksweeper

open -a OmniDiskSweeper /

BaoBab is available on both Linux & Mac:

brew install baobab

baobab /

But for CLI junkies there is also ...

Disk Space Commands

Aside from the classic portable unix df and du commands...

... there is this cool interactive 'ncurses du' which allows you to easily drill down to find the biggest directories and files:

brew install ncdu

sudo ncdu /

The biggest directories and files are automatically sorted to the top for convenience at each level you drill in to.

Type ? for the interactive help menu.

Check USB Bus Speed

USB bus makes a huge difference between USB 2 and USB 3.

On a Time Machine restore of my hosed mac, this was the difference between 80-90 hour s and 2-3 hours projected completion time.

system_profiler SPUSBDataType

Even among USB 3.1 look at the speed difference different cables can make with identical model SanDisk Extreme Pro SSD disks:

system_profiler SPUSBDataType | grep -e Bus -e Speed -e Manufacturer

    USB 3.1 Bus:
          Speed: Up to 480 Mb/s
          Manufacturer: SanDisk
    USB 3.1 Bus:
          Speed: Up to 10 Gb/s
          Manufacturer: SanDisk
    USB 3.1 Bus:

Disk Management Tutorials

Part 1 - List, Verify, Repair, Rename, Erase volumes

Part 2 - Partition, Format, Split / Merge Partitions

Part 3 - Create .dmg disk images from a Volume / Folder, Encrypted Disk Image, Resize Image, Restore Image

List disks

diskutil list

diskutil mount and diskutil mountDisk are the same

Mount a partition

diskutil mount /dev/disk4s2

diskutil unmount /dev/disk4s2

Unmount all filesystems on a disk:

diskutil unmountDisk force "/dev/$disk"

or by volume location:

diskutil unmount "/Volumes/$NAME"

Mount a partition read-only if having trouble and trying to recover data:

diskutil mount readOnly /dev/disk4s2

Mount at a different location to the default /Volumes/<partition_metadata_name>:

diskutil mount /dev/disk4s2 -mountPoint /path/to/dir

Mount / unmount partitions on a whole disk by reading its partition table:

diskutil mountDisk disk10

diskutil unmountDisk disk10

Verify a volume:

diskutil verifyVolume "/Volumes/$NAME"

Repair volume:

diskutil repairVolume "/Volumes/$NAME"

diskutil verifyPermissions "/Volumes/$NAME"

diskutil repairPermissions "/Volumes/$NAME"

These operations are risky as you might get the disk wrong - it's much easier and safer to do this in Disk Utility!

Format a partition:

Risky because there is no confirmation and you could end up doing this to the wrong disk!!

diskutil eraseDisk "$filesystem" "$name" "/dev/$diskN"

See which filesystems are available for formatting:

diskutil listFilesystems

Formattable file systems

These file system personalities can be used for erasing and partitioning.
When specifying a personality as a parameter to a verb, case is not considered.
Certain common aliases (also case-insensitive) are listed below as well.

-------------------------------------------------------------------------------
PERSONALITY                     USER VISIBLE NAME
-------------------------------------------------------------------------------
Case-sensitive APFS             APFS (Case-sensitive)
  (or) APFSX
APFS                            APFS
  (or) APFSI
ExFAT                           ExFAT
Free Space                      Free Space
  (or) FREE
MS-DOS                          MS-DOS (FAT)
MS-DOS FAT12                    MS-DOS (FAT12)
MS-DOS FAT16                    MS-DOS (FAT16)
MS-DOS FAT32                    MS-DOS (FAT32)
  (or) FAT32
HFS+                            Mac OS Extended
Case-sensitive HFS+             Mac OS Extended (Case-sensitive)
  (or) HFSX
Case-sensitive Journaled HFS+   Mac OS Extended (Case-sensitive, Journaled)
  (or) JHFSX
Journaled HFS+                  Mac OS Extended (Journaled)
  (or) JHFS+

Rename a disk:

diskutil rename "$volume_name" "$new_volume_name"

Partition and Format a disk

These operations are risky as you might get the disk wrong - it's much easier and safer to do this in Disk Utility!

APFS requires GPT partition table.

disk="disk4"
partition_table="GPT"
name="MyVolume"
filesystem="APFSX"  # AppleFS case-sensitive, found from 'diskutil listFilesystems' above
size="0b"           # integer + units suffix (b, m or g for bytes, megabytes or gigabytes) - '0b' uses all space

diskutil partitionDisk "/dev/$disk" "$partition_table" "$filesystem" "$name" "$size"
Multiple Partition and Format
diskutil partitionDisk /dev/"$disk" "$partition_table" "$filesystem" "First"  "$size" \
                                                       "$filesystem" "Second" "$size" \
                                                       "$filesystem" "Third"  "$size" \
                                                       "$filesystem" "Fourth" "$size" \
                                                       "$filesystem" "Fifth"   0b  # '0b' to use up all remaining space

Partition splitting doesn't seem to work with APFS, only macOS Extended, as APFS tells you to diskutil apfs deleteContainer disk10 instead which leaves you with free space to create a new partition.

Encrypt APFS Filesystem

If you partitioned it without APFS, reformat the disk with APFS:

diskutil eraseDisk APFS "$name" "/dev/$disk"

Alternatively, if you already have GPT parititioned disk and only want to format the partition:

diskutil eraseVolume "APFSX" "MyEncryptedDisk" "/dev/${synthesized_disk}s1"

Notice the disk here will be different to the physical disk, it'll be the synthesized disk of an increment higher disk number as shown by diskutil list.

Then encrypt the APFS container partition, in this case the first partition s1:

diskutil apfs encryptVolume "/dev/${synthesized_disk}s1" -user disk -passphrase "$password"

Or better pass via stdin:

diskutil apfs encryptVolume "/dev/${synthesized_disk}s1" -user disk -stdinpassphrase <<< "$password"

If you omit the <<< "$passphrase" part of the command, it'll wait for you without a prompt to enter the passphrase interactively on the command line, so not storing it in shell history (alternatively if using Bash unset HISTFILE to prevent it being written to ~/.bash_history):

diskutil apfs encryptVolume "/dev/${synthesized_disk}s1" -user disk -stdinpassphrase

Decrypt the volume:

diskutil apfs decryptVolume "${synthesized_disk}s1" -user disk -stdinpassphrase <<< "$password"

If you want to add a password hint you'll need to do this via the macOS GUI via Disk Utility instead:

open -a "Disk Utility"

Create an Encrypted File Volume

To create an encrypted volume within a file...

GUI - Disk Management Utility

From the top menu in Disk Management:

File -> New Image -> Blank Image:

  • Set the File Name
  • Set the fields at the bottom:
    • Volume Name - how it appears when mounted
    • Encryption - set to 256-AES encryption
    • Size - eg. 100mb
    • Image Format - set to sparse disk image (not sparse bundle disk image which uses a directory with 8MB fragments, which is more efficient for backups but harder to manage as you need to keep the directory structure intact).
CLI - HDIutil

Stick if on an APFS encrypted USB using the sections above for extra security.

cd /Volumes/MyEncryptedUSB

hdiutil create -encryption AES-256 -size 100m -fs APFS -type SPARSE -volname "$name" "$name.dmg"

hdiutil attach "$name.dmg"

hdiutil deattach "$name.dmg"

Erase a disk before decommissioning it

Either use Disk Utility above, a command like diskutil eraseDisk ... or the more portable unix command dd with a custom command like this to do a moderate 3 pass overwrite (tune number of passes variable to suit your level of data recovery paranoia, eg. DoD standard 7 passes):

WARNING: disk numbers may shunt up in numbers as you insert more removal drives, especially for 'synthesized' virtual disks that display for volume containers

passes=3
time \
for number in $(seq $passes); do
    echo pass $number
    echo
    time sudo dd if=/dev/urandom of=/dev/disk4 bs=1M
    echo
done

Note: multiple passes are only for old inaccurate HDDs rotating mechanical metal platter disk. For SSDs, you only need a single pass.

Service Management

List services:

sudo launchctl list

Load and start a service from a plist file:

sudo launchctl load -F "/System/Library/LaunchDaemons/$name.plist"
sudo launchctl start "com.apple.$name"

Stop and unload a service:

sudo launchctl stop "com.apple.$name"
sudo launchctl unload "/System/Library/LaunchDaemons/$name.plist"

See dhcp.md for a practical example of using this for the built-in tftp server for PXE boot installing Debian off your Mac.

You can also go to Finder and delete the App with Ctrl-Backspace which gives a pop-up to remove its system extensions (also stops its services), eg. for otherwise stubborn services like Avira antivirus.

Sound Management

Set Sound Output Volume

osascript -e "set volume output volume 50"

Switch Sound Output

Install switchaudio-osx:

brew install switchaudio-osx

List sound outputs:

SwitchAudioSource -a -t output

Hari’s AirPods Pro
BlackHole 2ch
MacBook Pro Speakers
Microsoft Teams Audio
Multi-Output Device

Choose one:

SwitchAudioSource -s "MacBook Pro Speakers"

SwitchAudioSource -s "Hari’s AirPods Pro"

SwitchAudioSource -s "Multi-Output Device"

Shazam Songs while using Headphones

Capture the songs from your favourites movies or TV shows while listening with headphones.

See the instructions on the audio page.

Hammerspoon - System Event Handler

:octocat: Hammerspoon/hammerspoon

Hammerspoon is a system event handler for Mac.

The code is written in Lua.

brew install hammerspoon --cask

Then create a ~/.hammerspoon/init.lua to register your event handlers.

My code is found at :octocat: HariSekhon/Hammerspoon.

mkdir -p -v ~/github

git clone https://github.com/HariSekhon/Hammerspoon ~/github/hammerspoon

ln -svFhw ~/github/hammerspoon ~/.hammerspoon

Output:

/Users/hari/.hammerspoon -> /Users/hari/github/hammerspoon

As documented on this Audio page section I use this to be able to Shazam songs from movies or TV shows while watching them on AirPods, and used this code to automatically switch to the multi-output audio device to be able to do so.

Finally, start Hammerspoon, you should see its icon in the menu bar.

open -a Hammerspoon

Set Hammerspoon to start at login (you can tick this in the Hammerspoon Preferences UI) or just run this:

osascript -e 'tell application "System Events" to make login item at end with properties {path:"/Applications/Hammerspoon.app", hidden:false}'

Optionally allow pop-up desktop notifications from Hammerspoon so that your code can notify you when it's done something for you (I recommend Banners that automatically disappear without having to click them).

System Settings -> Notifications ->Hammerspoon:

open "x-apple.systempreferences:com.apple.Notifications-Settings.extension?bundleId=org.hammerspoon.Hammerspoon"

KeyChain Access

open -a "Keychain Access"

Binaries Debugging

See the Binaries Debugging doc for commands to examine and work with binaries.

Creating Bootable CDs & USBs from ISOs

Macs and many computers don't come with CD/DVD anymore to save space, so you can either buy an external USB dvd-writer or create bootable USBs.

To create a bootable USBs from ISO image files intended for CD/DVDs in order to use them to install Linux or use a disk wiping distro like DBAN or ShredOS, you can download Etcher or use mac_iso_to_usb.sh from DevOps-Bash-tools:

mac_iso_to_usb.sh "$iso"  # /dev/disk4

Other Options

  1. UNetbootin app from github
  2. DiskUtility
  3. CLI

CLI

Set your filename in a variable so the following commands can be executed as is without editing:

export ISO="memtest86+-5.01.iso"

Convert it to make it bootable - will automatically add .dmg suffix => .img.dmg:

hdiutil convert -format UDRW -o "$ISO.img" "$ISO"

Figure out which is the USB disk - be careful or you'll destroy your system!

diskutil list

diskutil unmountDisk /dev/diskN

Tip: prefixing disk with 'r' uses raw disk which is faster:

sudo dd if="$ISO.img" of=/dev/rdiskN bs=1m # or 1M

diskutil eject /dev/diskN

Burn CD - insert blank CD then:

hdiutil burn "$ISO"

Asahi Linux on Apple Silicon

https://asahilinux.org/

Use at your own risk.

There is a reason I put this just before the Troubleshooting section... :wink:

XCode Mobile App Builds

See Mobile Builds doc.

Time Machine

WARNING: Vendor Encrypted Drives Cannot Be Used to Restore Data in the macOS Recovery Mode

If you choose to use the device vendor's encryption on your external drive, this usually requires an app provided by the vendor, it may seem fine at first as you'll be unable to back up and restore in normal full macOS installation but if you've hit a bootup problem and need to work in recovery mode, then you'll be unable to unlock and access the vendor encrypted disk as the vendor software will not work in macOS recovery mode which is a very cut down version.

In that case, your options will be to use another disk or do an emergency file backup & recovery.

See the Emergency File Backup from Recovery Mode and Reinstall macOS & Restore Data sections under Troubleshooting further down.

Exclude Paths from Backups

Add Path to Backup Exclusions

You can do this in the Time Machine UI, but it's easier to do this on the command line:

sudo tmutil addexclusion -p "$path"

Omitting the -p switch sets it on the directory attributes rather than in Time Machine, making it sticky if the folder is moved.

Unfortunately without the -p switch the folder does not appear in the Time Machine UI, and you can only find this by querying all the directories one by one

xattr -p com.apple.metadata:com_apple_backup_excludeItem "$path"

which is of course a terribly non-scalable O(1) operation to try to find what is excluded...

So ensure you use the -p switch to record it in the UI instead for clarity, at the expense of not tracking the directory moves.

WARNING: omitting the -p switch leaves you blind and you may get a shock that a directory you thought was backed up is in fact not

If you have played around with this and want to do a deep search, use this script from DevOps-Bash-tools:

mac_backup_find_excluded_paths.sh

The following script in DevOps-Bash-tools adds the common cache paths to the exclusion list in the correct way that you can see in the UI. You can quickly add your local repo's build and Pods directories as args too:

mac_backup_exclude_paths.sh "$PWD/build" "$PWD/Pods"

Remove Path from Backup Exclusions

This attempts to remove the xattr on the path itself:

sudo tmutil removeexclusion "$path"

Use -p if it was set at global path level using sudo tmutil addexclusion -p ...

sudo tmutil removeexclusion -p ~/github/go-tools/ath

If you get an error like this:

sudo tmutil removeexclusion ~/github/go-tools/ath

/Users/hari/github/go-tools/ath: Error (-43) while attempting to change exclusion setting.

Compare the path to the paths in:

defaults read /Library/Preferences/com.apple.TimeMachine SkipPaths

Try using -p if it was set with that and also the exact absolute path /Users/hari/github/... matching the above output instead of ~/github/...:

sudo tmutil removeexclusion -p /Users/hari/github/go-tools/ath

Trigger Backup

tmutil startbackup

Backup status:

tmutil status

Cancel backup:

tmutil stopbackup

List Backups

List time machine backups:

tmutil destinationinfo

Only the disks that show a line Mount Point like this are currently plugged in and mounted to be available:

Mount Point   : /Volumes/<name>...

Determine the Mount Point of the backup disk:

BACKUP_MOUNTPOINT="$(tmutil destinationinfo | awk -F " : " '/^Mount Point/{print \$2; exit}' | tee /dev/stderr)"

List all backups:

tmutil listbackups

The latest one is at the bottom of the list as it's in date timestamp ascending order.

Restore a file from latest backup

Save the latest one:

LATEST_BACKUP="$(tmutil latestbackup | tee /dev/stderr)"

or

LATEST_BACKUP="$(tmutil listbackups | tail -n 1 | tee /dev/stderr)"

Sometimes this will print a path like this that doesn't exist:

/Volumes/.timemachine/12A345B6-7CDE-8FA9-0B1C-2D34567EF890/1234-56-78-901234/2025-02-21-012346.backup/2025-02-21-012346.backup

when in fact it would be:

$BACKUP_MOUNTPOINT/2025-02-21-012346.backup

So check the path and try different variations for the LATEST_BACKUP path.

Restore a file:

tmutil restore "$LATEST_BACKUP/Data/$PWD/$filename" "$PWD/$filename"

To handle these variations and test the backups for the latest version which has it, from DevOps-Bash-tools:

mac_restore_file.sh "$filename"

Find Unexpected Big Files Going in to the Current Backup

Sometimes it's perplexing why Time Machine is taking so long or backing up large volume of hundreds of GB when you know nothing much has changed in your data or applications since the last backup:

After trying many crappy tmutil commands that don't work any more and random things off the internet, it turns out this old skool method is the most reliable to find out what is going in there:

sudo du -max /Volumes/*/$(date '+%F')-*.inprogress/ | sort -k1n | tail -n 1000

This is scripted more easily in mac_backup_du_in_progress.sh in DevOps-Bash-tools which will try for an inprogress dir for today or yesterday if today's one is not found, as if you're a night owl like me the backup might have started before midnight.

If the backup has finished, then just find the latest backup and do the same:

sudo du -max /Volumes/*/$(date '+%F')-*.previous/ | sort -k1n | tail -n 1000

I found out this unexpected culprit:

1660 2025-12-08-224300.inprogress//Macintosh HD - Data/System/Library/AssetsV2/com_apple_MobileAsset_MacSoftwareUpdate

macOS was wasting my time backing up the software update download 😒.

I've added this to:

mac_backup_exclude_paths.sh

in the Exclude Paths From Backups section above.

Sharing a Time Machine disk with Data

Time Machine requires formatting a complete disk to structure it correctly.

Do not copy data to your Time Machine volume, disk snapshots may prevent space reclamation when you try to delete your files.

Instead, create an additional volume using Disk Utility or the command line and store your files on the second Data volume.

Both the Time Machine volume and the Data volume on the disk will share the overall disk space dynamically as they fill up, but this way, removing files from the Data volume will actually reclaim the space from the overall disk as it it will not be affected by time machine snapshots.

External Disk Management

To reclaim space on the external disk...

Delete Large Directories

Find and delete large directories such as .TemporaryItems, .fseventsd, .Trashes

sudo rm -rf "/Volumes/$NAME/.fseventsd" \
            "/Volumes/$NAME/.TemporaryItems" \
            "/Volumes/$NAME/.Trashes"

Disable Indexing on the Disk

sudo mdutil -i off "/Volumes/$NAME"

Delete the Index

sudo mdutil -E "/Volumes/$NAME"

Manually Delete the .Spotlight-V100 folder

If it still remains:

sudo rm -rf "/Volumes/$NAME/.Spotlight-V100"

Delete Versioned Backups

sudo rm -rf "/Volumes/$NAME/.DocumentRevisions-V100"

Restart mds, mds_stores and revisiond

To allow space to be reclaimed:

sudo killall mds mds_stores revisiond

Verify Free Space

df -h "/Volumes/$NAME"

Troubleshooting

Discrepancy Between df and du

sudo du -csh "/Volumes/$NAME"

2.2T    /Volumes/$NAME
2.2T    total

df -h "/Volumes/$NAME"

Filesystem      Size    Used   Avail Capacity iused ifree %iused  Mounted on
/dev/disk5s2   3.6Ti   3.6Ti    59Gi    99%    4.8M  618M    1%   /Volumes/$NAME

This can be caused by files being held open (kill the process):

sudo lsof +L1

Or in my case Time Machine APFS snapshots which are counted by df but not by du:

tmutil listlocalsnapshots "/Volumes/$NAME"

or if it's the root disk:

tmutil listlocalsnapshots /

You can either tell macOS to try to delete enough snapshots to free 100GB (number is in bytes), and on level from 1 - 4 of aggressiveness, ie. you need the space reclaimed urgently:

sudo tmutil thinlocalsnapshots / 100000000000 4

Or you can try to delete snapshots explicitly or delete iterate to delete all the snapshots (OS update snapshots do not get deleted even when ordered to):

for snapshot in $(tmutil listlocalsnapshots / | command ggrep -oP '\d{4}-\d\d-\d\d-\d+'); do
    sudo tmutil deletelocalsnapshots "$snapshot"
done

There is a script in DevOps-Bash-tools for this called:

mac_delete_local_snapshots.sh

If you get this error:

/Volumes/NAME is an APFS backup disk. Use 'tmutil listbackups' to list APFS backup snapshots.

then:

tmutil listbackups

/Volumes/.timemachine/A1BCD23E-45F6-78AB-901C-2DE34567FAB8/2025-03-28-015336.backup/2025-03-28-015336.backup

I deleted the backup so I could free up space, but you may want to keep your backup:

sudo tmutil delete -d "/Volumes/$NAME" -t 2025-03-28-015336

1 backups deleted

Another thing to check is for .interrupted and .incomplete directories of backups that failed to complete, such as the machine sleeping and disconnecting the external disk.

cd "/Volumes/$NAME" && rm -fr *.previous *.interrupted

After this du and df reconciled.

Spotlight Search failing to find App

If Cmd-Space Spotlight pop up search is failing to find an app like Spotify.app and instead only giving you Google Chrome or other results wrong results, try erasing and re-indexing the Spotlight index:

sudo mdutil -E /

This fixed it for me.

Also check that you haven't excluded a location under System -> Siri & Spotlight -> Spotlight Privacy (exclusions at the bottom).

XCodeBuild error complaining XCode only has command line tools

xcode-select: error: tool 'xcodebuild' requires Xcode, but active developer directory '/Library/Developer/CommandLineTools' is a command line tools instance

Switch to full Xcode:

sudo xcode-select -switch /Applications/Xcode.app/Contents/Developer

Verify the change:

xcode-select -p

Output:

/Applications/Xcode.app/Contents/Developer

Accept license if you have to:

sudo xcodebuild -license

Various Applications Fail to Open

Often with this pop-up error:

Activity Monitor not open any more

The application “Microsoft Remote Desktop.app” is not open anymore.

This is the same whether you open it via an icon or Spotlight Cmd + Space and autocomplete.

This even happens with Activity Monitor.

Same with IntelliJ IDEA:

$ open -a "IntelliJ IDEA CE"
The application /Applications/IntelliJ IDEA CE.app cannot be opened for an unexpected reason, error=Error Domain=NSOSStatusErrorDomain Code=-600 "procNotFound: no eligible process with specified descriptor" UserInfo={_LSLine=4141, _LSFunction=_LSOpenStuffCallLocal}

Same with Settings:

$ open -a "Settings"
The application /System/Applications/System Settings.app cannot be opened for an unexpected reason, error=Error Domain=NSOSStatusErrorDomain Code=-600 "procNotFound: no eligible process with specified descriptor" UserInfo={_LSLine=388, _LSFunction=_LSAnnotateAndSendAppleEventWithOptions}

Same with Microsoft Remote Desktop.

Clicking the icon results in a pop up with this error:

The application “Activity Monitor.app” is not open anymore.

The application “Microsoft Remote Desktop.app” is not open anymore.

open -a "Microsoft Remote Desktop"
The application /Applications/Microsoft Remote Desktop.app cannot be opened for an unexpected reason, error=Error Domain=NSOSStatusErrorDomain Code=-600 "procNotFound: no eligible process with specified descriptor" UserInfo={_LSLine=388, _LSFunction=_LSAnnotateAndSendAppleEventWithOptions}

Only Finder seems to work:

open -a "Finder"

Fix: Reboot the Mac... tried a few other things like killing all the stale processes but none of them worked and when your Terminal window gets closed and you get the same error trying to re-open another one, it's game over. Reboot.

Cannot Delete - No Space Left on Device

APFS requires a small amount of space to even be able to delete files.

Workarounds:

  • Empty Trash
  • try echo > "$filename" or truncate -s 0 "$filename" instead of rm
  • delete the VM apfs volume containing the sleep image and give enough space for APFS to maneuvre again

If even after freeing a bit of space from an adjacent volume like VM you still get the no space left on device error from rm then it's possible you have catastrophic APFS corruption of the metadata.

This has happened to me under heavy writes and deletes at the same time, and in that case the only way to recover is to reinstall macOS to recreate the special Data linked partition and then restore from Time Machine Backup.

See the Reinstall macOS & Restore Data section below, but first, do your backups!

Emergency Backup

If you hit the above APFS catastrophic metadata corruption and are unable to delete anything from a drive to recover and start using it again, then your only choice is to reinstall macOS and then restore your data from your latest time machine backup.

If you are able to plug your Time Machine backup disk in, take a full backup.

If you cannot take a time machine backup or your machine no longer boots then follow the next section.

Bootup Hangs on Black Screen after Full Data Disk

If your macOS fails to boot due to the full Data disk then you will need to enter Recovery Mode and do your emergency backup and recovery from there.

On newer Apple Silicon Macs hold the power button for 5-10 seconds to start up to the Options menu.

In the menu, click Options to the right, and then Recovery Mode.

If your existing backups are not completely up to date (as is often the case if you're on a laptop and therefore not leaving your backup disk plugged in to for hourly backups due to moving moving around), then you will need to do an emergency time machine backup from recovery mode and then restore that.

Once you've taken a backup in recovery mode you'll then need to reinstall macOS and restore your data using the latest Time Machine backup as per the section below.

If instead you want to a potentially more selective emergency file level backup, if you are able to boot macOS normally then run rsync to copy your files off to the backup disk.

If you're not able to boot macOS though, you'll need to do an emergency file backup as per the next section.

If you have made the mistake of using vendor encryption on your external disk then you will not be able to unlock it in macOS recovery mode to take a time machine backup and must use another disk to do either a time machine backup or a file level backup.

Emergency File Backup from Recovery Mode

If you can't access your time machine backup disk from recovery mode due to it being vendor encrypted, then you'll have to get another disk and either do a time machine backup to that or do a file level backup.

The file level backup has the benefit of giving you the option of only backing up a few key paths such as your latest work directories (be careful you don't miss anything important though). For this, the trusty old rsync command is recommended.

Recovery Mode is extremely limited though, it doesn't even have rsync, so you'll need to download the right rsync binary using your phone or another computer from here:

https://download.samba.org/pub/rsync/binaries/

For macOS specifically:

https://download.samba.org/pub/rsync/binaries/macos-12.6-arm64/latest.tar.gz

and then transfer it to the portable disk to use it in recovery mode.

tar zxvf latest.tar.gz

rsync -av ...

Reinstall macOS & Restore Data

You cannot just delete and recreate the internal home Data APFS volume because it is a special volume.

It must be paired with the installation at install time.

This means that under catastrophic APFS corruption failure scenario you need to reinstall macOS and then restore your Time Machine backup.

On newer Apple Silicon Macs hold the power button for 5-10 seconds to start up to the options menu.

Under Options there is a hidden partition that allows you to reinstall macOS and recreate the Data partition.

First, however, you need to erase the entire Macintosh HD container, not the volume, but the container itself.

Using Disk Utility in Recovery Mode, Erase the Container holding Macintosh HD with the following options:

FieldValue
NameMacintosh HD
FormatAPFS
SchemeGUID Partition Map (if it shows this option)

Then exit Disk Utility and from the Options menu click the option to Reinstall macOS.

The reinstall will probably take 1-2 hours.

After that, restore your latest Time Machine backup, which if you've got a good fast SSD and USB 3 cable took me 2-3 hours for 4TB.

If you've had to do an Emergency File Backup from Recovery Mode, then rsync the newer files that changed since your last Time Machine backup.

Relevant GitHub Repos

Readme Card

Memes

Headquarters

Headquarters

Mac User Been Here

Mac User Been Here

Using Hardware to Solve Problems

This includes your MacBook Pro - 128GB RAM ftw...

Using Hardware to Solve Problems

So you can have 50G RAM of Chrome tabs

Chrome RAM

ps. gif screencapture scripts for the two styles, above and below, are in the DevOps-Bash-tools repo.

And IntelliJ hogging 20GB RAM

IntelliJ RAM

Chrome Take All of It

Chrome Take All Resources

Macbook USB Stick

How Do I Use USB Stick

If Apple Sold Mugs

If Apple Sold Mugs

Ported from various private Knowledge Base pages 2010+