Buildoor: Ethereum PBS Testing Tool

Work in Progress - This project is under active development. APIs, configuration flags, and behavior may change without notice.

Devnet & Testnet Use Only - Buildoor is a testing tool designed exclusively for Ethereum devnets and testnets. It is not intended to be profitable or used on mainnet. Its sole purpose is to exercise and validate the block builder flow during protocol development and testing.

Buildoor is an Ethereum block builder that supports two modes of operation: ePBS (enshrined Proposer-Builder Separation) for the upcoming Gloas fork, and the traditional Builder API for pre-ePBS forks (Fulu and earlier). It connects to consensus layer (CL) and execution layer (EL) clients to build blocks, submit bids, and manage builder lifecycle operations.

Builder Modes

ePBS (Enshrined Proposer-Builder Separation)

The ePBS mode is designed for the Gloas fork, where proposer-builder separation is enshrined directly into the Ethereum protocol. In this mode, Buildoor:

• Builds execution payloads via the Engine API
• Submits bids to the beacon node on a configurable time schedule relative to slot boundaries
• Reveals payloads at a configured time after the block is proposed
• Tracks bid competition and payload inclusion on-chain
• Requires the builder to be registered on the beacon chain with a deposit (managed via --lifecycle)

ePBS is automatically available when the connected beacon node has the Gloas fork epoch configured. Use --epbs-enabled to activate bidding/revealing at startup.

Builder API

The Builder API mode implements the traditional MEV-Boost Builder API for pre-ePBS forks. In this mode, Buildoor:

• Runs a Builder API HTTP server that validators/relays can connect to
• Accepts validator registrations with fee recipient preferences
• Responds to getHeader requests with signed bid headers
• Publishes full blocks when a proposer submits a blinded block via submitBlindedBlock
• Supports a configurable block value subsidy to make bids more attractive for testing

Enable with --builder-api-enabled --builder-api-port <port>.

Building

# Build the binary (includes frontend)
make build

# Build Docker image
make docker

# Run tests
make test

Requires Go 1.25+ and Node.js 20+ (for the frontend).

Usage

Required Flags

Every run requires these four flags:

Flag	Description
--builder-privkey	Builder BLS private key (32 bytes hex)
--cl-client	Consensus layer beacon node URL
--el-engine-api	Execution layer Engine API URL
--el-jwt-secret	Path to JWT secret file for Engine API authentication

Basic Example

buildoor run \
  --builder-privkey <BLS_PRIVATE_KEY> \
  --cl-client http://localhost:5052 \
  --el-engine-api http://localhost:8551 \
  --el-jwt-secret /path/to/jwt.hex

ePBS Example

buildoor run \
  --builder-privkey <BLS_PRIVATE_KEY> \
  --cl-client http://localhost:5052 \
  --el-engine-api http://localhost:8551 \
  --el-jwt-secret /path/to/jwt.hex \
  --epbs-enabled \
  --lifecycle \
  --el-rpc http://localhost:8545 \
  --wallet-privkey <ECDSA_PRIVATE_KEY>

Builder API Example

buildoor run \
  --builder-privkey <BLS_PRIVATE_KEY> \
  --cl-client http://localhost:5052 \
  --el-engine-api http://localhost:8551 \
  --el-jwt-secret /path/to/jwt.hex \
  --builder-api-enabled \
  --builder-api-port 18550

Configuration Reference

Configuration can be provided via CLI flags, a YAML config file (--config path/to/config.yaml), or an environment variables.

Core Flags

Flag	Default	Description
--builder-privkey	(required)	Builder BLS private key (32 bytes hex)
--cl-client	(required)	Consensus layer beacon node URL
--el-engine-api	(required)	Execution layer Engine API URL
--el-jwt-secret	(required)	Path to JWT secret file
--el-rpc		Execution layer JSON-RPC URL (required for lifecycle)
--wallet-privkey		Wallet ECDSA private key (required for lifecycle)
--log-level	info	Log level: debug, info, warn, error
--config		Path to YAML config file

Builder API Flags

Flag	Default	Description
--builder-api-enabled	false	Enable the Builder API at startup
--builder-api-port	0	Builder API HTTP port (0 = disabled)
--builder-api-subsidy	100000	Block value subsidy added to bids (Gwei)

ePBS Flags

Flag	Default	Description
--epbs-enabled	false	Enable ePBS bidding/revealing at startup
--build-start-time	-4000	Payload build start time in ms relative to slot start
--epbs-bid-start	-1000	First bid time in ms relative to slot start
--epbs-bid-end	1000	Last bid time in ms relative to slot start
--epbs-reveal-time	6000	Payload reveal time in ms relative to slot start
--epbs-bid-min	1000000	Minimum bid amount (Gwei)
--epbs-bid-increase	100000	Bid increase per subsequent bid (Gwei)
--epbs-bid-interval	250	Interval between bids in ms (0 = single bid)

Schedule Flags

Flag	Default	Description
--schedule-mode	all	Schedule mode: all, every_nth, next_n
--schedule-every-nth	1	Build every Nth slot (for every_nth mode)
--schedule-next-n	0	Build next N slots then stop (for next_n mode)
--schedule-start-slot	0	Start building at this slot

Lifecycle Flags

Flag	Default	Description
--lifecycle	false	Enable builder lifecycle management (deposits, exits, top-ups)
--deposit-amount	10000000000	Builder deposit amount (Gwei, default 10 ETH)
--topup-threshold	1000000000	Balance threshold for auto top-up (Gwei, default 1 ETH)
--topup-amount	5000000000	Top-up amount (Gwei, default 5 ETH)

Other Flags

Flag	Default	Description
--api-port	0	WebUI/API HTTP port (0 = disabled)
--payload-build-time	2000	Time given to the EL to build the payload after fcu (ms)
--validate-withdrawals	false	Validate expected vs actual withdrawals

WebUI

Buildoor includes a web dashboard for monitoring builder activity in real time. Enable it with --api-port <port> and open http://localhost:<port> in your browser.

The dashboard provides:

• Real-time slot timeline and bid tracking via Server-Sent Events (SSE)
• Builder statistics and configuration management
• Bids Won tracking (Builder API mode)
• Validator registration overview

Local Development

# Start a local devnet
make devnet

# Run buildoor against the devnet
make devnet-run-docker

# Clean up the devnet
make devnet-clean

For frontend development:

cd pkg/webui
npm install
npm run dev    # watch mode

Docker

# Build
docker build -t buildoor .

# Run
docker run --rm buildoor run --help

License

See LICENSE for details.