Pre-script output v1

The pre-script output protocol — the contract between fullsend run and a harness pre_script (issue #4718).

A pre-script uses this protocol to tell fullsend run not to run the agent — for example when an open PR already addresses the issue. The decision lives in the CLI rather than in workflow YAML, so every forge inherits it: GitLab and Forgejo scaffolds invoke fullsend run directly and get the same gating with no CI-side reimplementation.

This document is normative. The Go implementation lives in internal/prescript.

Protocol

fullsend run creates an empty file inside the run directory and exports its absolute path to the pre-script:

FULLSEND_PRESCRIPT_OUTPUT=/path/to/run-dir/prescript-1234567890.out

The script appends key=value lines to that file. After the script exits successfully, fullsend run parses the file:

skipped	Behavior
true	Report a skipped status (⏭️), relay outputs, exit 0 before sandbox creation.
false, absent, or empty file	Proceed with the run — today's behavior.

Exit code 78 — neutral skip

Exit code 78 is an alternative way to request a skip (issue #582). When fullsend run sees exit code 78 it treats the run as skipped/neutral — identical to skipped=true in the output file. The code follows the CI convention for "neutral" (used by GitHub Actions and others).

Exit code	Behavior
0	Parse the output file; skipped=true requests a skip.
78	Skip unconditionally. Output file is parsed best-effort for reason and other outputs; a parse error does not block the skip.
Any other non-zero	Hard failure, unchanged by this protocol.

Exit 78 is complementary to the file-based skipped=true mechanism. Either one alone is sufficient to request a skip. When a script exits 78, the skip proceeds even if the output file says skipped=false or is malformed — the exit code is authoritative.

Stdout as fallback reason: When a script exits 78 and no reason key is found in the output file, fullsend run uses the last non-empty line of the script's stdout as the skip reason. This lets simple scripts communicate a reason without using the output file at all:

echo "No issues need scoring"
exit 78

The stdout-derived reason is sanitized before use: control characters (U+0000–U+001F, U+007F) are stripped — matching the file-based value validation — and the result is capped at 1024 bytes.

Reserved keys

Key	Required	Meaning
skipped	no	true or false. Any other value — including an empty one — is an error.
reason	no	Short human-readable explanation, shown in the run log and in the status comment.

Reserved keys are lowercase. A key differing only in case (SKIPPED=true) is a hard error rather than an unrelated output — see Error semantics.

Other keys

Any other valid key is parsed, logged, and relayed. Reserved-key names are owned by the protocol; a future CLI may interpret additional lowercase single-word keys, so scripts should prefix their own outputs (myagent_pr=123) to avoid colliding with a future directive.

Grammar

Line-based. One assignment per line:

skipped=true
reason=an open PR already addresses this issue
# comments and blank lines are ignored
myagent_existing_pr=123

• Keys match ^[a-zA-Z_][a-zA-Z0-9_-]*$ (hyphens allowed).
• Values are single-line and may not contain control characters (U+0000–U+001F, U+007F). This includes \r and \n.
• Whitespace surrounding the key and the value is insignificant: skipped = true is equivalent to skipped=true.
• Comments are lines whose first non-whitespace character is #. A value may contain #; only a leading # starts a comment.
• = in values is preserved — only the first = splits the line.
• Repeated keys: the last assignment wins.
• Maximum file size is 1 MiB.

Not supported

The format resembles GITHUB_OUTPUT but is not compatible with it:

• No key<<DELIMITER heredoc form. Multiline values are not expressible; a heredoc line is a hard error with a message naming this limitation.
• No quoting. skipped="true" is an error, not true.

Error semantics

These are hard errors — the run fails rather than proceeding:

Condition	Rationale
A line that is not key=value	A typo like skipped true silently ignored would start the duplicate agent run the pre-check exists to prevent.
A key that fails the key pattern	Same.
A key differing from a reserved key only by case	SKIPPED=true would otherwise be stored as an unrelated output and the run would proceed silently.
A value containing a control character	A bare \r is a line terminator to the GitHub Actions runner, so such a value could smuggle extra output entries — including overriding skipped.
skipped set to anything but true/false	Same silent-proceed risk.
skipped present but empty (skipped=)	skipped=${SKIP} with SKIP unset is a plausible script bug, and an intended skip must not degrade into a duplicate run. An absent skipped key means proceed; a present-but-empty one does not.
The output file missing after the script ran	fullsend run created it beforehand, so its absence means the script removed it.
File larger than 1 MiB	Bounded read.

Failing closed is deliberate: an unparseable skip request must not degrade into a duplicate agent run.

CI relay

When running under GitHub Actions (GITHUB_ACTIONS=true and GITHUB_OUTPUT set), fullsend run appends the outputs to $GITHUB_OUTPUT on every path it reaches the skip decision on — skip, proceed, and harnesses that define no pre_script at all — with skipped normalized to true/false. The composite action re-exports them as the skipped and skip-reason action outputs.

A consumer can therefore distinguish three states:

steps.<id>.outputs.skipped	Meaning
true	The pre-script requested a skip.
false	The skip decision was made and was "proceed" — either the pre-script declined to skip, or the harness has no pre_script.
(empty)	The CLI predates this protocol, or the run failed before reaching the skip decision.

The empty case is ambiguous by construction: a relay only happens once the decision exists, so a run that fails earlier (harness load, pre-script failure, malformed output) writes nothing. Check the step's outcome before treating an empty skipped as a version signal.

If a relay target exists but writing fails, the run fails — a workflow gate that disagrees with the CLI's decision is the failure mode this protocol is meant to remove.

Other CI systems get the outputs in the run log only. GitLab dotenv report artifacts are the natural equivalent and are not implemented in v1; GitLab still gets the skip itself and the ⏭️ status comment, since both flow through fullsend run and forge.Client.

Version skew

Same class of concern as ADR 0062. The two directions are handled asymmetrically, deliberately:

Direction	Behavior
Old script, new CLI	The script never writes to the file. Empty file → proceed. Fails safe.
New script, old CLI	FULLSEND_PRESCRIPT_OUTPUT is unset, so the script cannot signal a skip and the agent runs anyway. Fails open — a duplicate run.

Scripts must therefore guard on the variable, the same pattern as the existing GITHUB_OUTPUT guard in the scaffold scripts:

if [ -n "${FULLSEND_PRESCRIPT_OUTPUT:-}" ]; then
  {
    echo "skipped=true"
    echo "reason=an open PR already addresses this issue"
  } >> "${FULLSEND_PRESCRIPT_OUTPUT}"
fi

Without the guard, >> to an empty path fails the script and therefore the run.

Versioning

Breaking changes require docs/normative/prescript-output/v2/.

Change	v1 impact
Breaking (requires v2): rename or remove a reserved key, change the meaning of a reserved value, tighten the grammar so previously valid files are rejected	Pre-scripts must migrate
Non-breaking (allowed in v1): add a reserved key, relax the grammar, add exit-code handling that relaxes failure conditions, clarify documentation	Existing pre-scripts keep working

Exit code semantics are part of the v1 protocol surface. Adding a new recognized exit code (like 78) is non-breaking because it turns a previously-hard failure into a skip — existing scripts that never exit 78 see no change.

Adding a reserved key is non-breaking for the CLI but fails open on older CLIs, which ignore it. Direct a script that depends on a newly added key at a CLI version that understands it.