Default Regional Configuration
August 8, 2018 ยท View on GitHub
This table suggest values you need to enter in your Network configuration for each region. I strongly recommend you double-check those with LoRaWAN 1.0.2 Regional Parameters and the registlation in your country.
| Parameter | EU868 | US902 | CN779 | EU433 | AU915 | CN470 | AS923 | KR920 | IN865 | RU868 |
|---|---|---|---|---|---|---|---|---|---|---|
| Coding Rate | 4/5 | 4/5 | 4/5 | 4/5 | 4/5 | 4/5 | 4/5 | 4/5 | 4/5 | 4/5 |
| RX1 Join Delay (s) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| RX2 Join Delay (s) | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| RX1 Delay (s) | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| RX2 Delay (s) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Gateway Power | 16 | 26 | 12 | 12 | 30 | 19 | 16 | 23 | 30 | 16 |
| Max EIRP (dBm) | 16 | 30 | 12.15 | 12.15 | 30 | 19.15 | 16 | 14 | 30 | 16 |
| Max Power | Max | Max | Max | Max | Max | Max | Max | Max | Max | Max |
| Min Power | Max - 14dB | Max - 20dB | Max - 10dB | Max - 10dB | Max - 20dB | Max - 14dB | Max - 14dB | Max - 14dB | Max - 20dB | Max - 14dB |
| Max Data Rate | SF7 125 kHz | SF8 500 kHz | SF7 125 kHz | SF7 125 kHz | SF8 500 kHz | SF7 125 kHz | SF7 125 kHz | SF7 125 kHz | SF7 125 kHz | SF7 125 kHz |
| Initial Duty Cycle | 100% | 100% | 100% | 100% | 100% | 100% | 100% | 100% | 100% | 100% |
| Initial RX1 DR Offset | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Initial RX2 DR | SF12 125 kHz | SF12 500 kHz | SF12 125 kHz | SF12 125 kHz | SF12 500 kHz | SF12 125 kHz | SF10 125KHz | SF12 125 kHz | SF10 125 kHz | SF12 125 kHz |
| Initial RX2 Freq (MHz) | 869.525 | 923.3 | 786 | 434.665 | 923.3 | 505.3 | 923.2 | 921.90 | 866.550 | 869.1 |
| Initial Channels | 0-2 | 0-71 | 0-2 | 0-2 | 0-71 | 0-95 | 0-x* | 0-2 | 0-2 | 0-1 |
In AS923 you need to defined country specific channels. The x* then represents the highest channel you defined.