Prompt Tuning Strikes Back: Customizing Foundation Models with Low-Rank Prompt Adaptation

This repository contains the official implementation of the paper titled "Prompt Tuning Strikes Back: Customizing Foundation Models with Low-Rank Prompt Adaptation" accepted at NIPS 24.

---

Installing Dependencies

To set up the project dependencies, you have two options:

Option 1: Using pip

pip install -r requirements.txt

Option 2: Using docker

Alternatively, you can use a Docker image with pre-installed dependencies.

docker pull aj0509/prog_synth:latest

---

Training the Model

To tune the model, you need to run the tune_foundation_model.py script.

Arguments

• --peft_method: Specifies the PEFT method to be used.

  • Possible values: lora, pt, idpg, lopa

• --task_name: Name of the task to be trained on.

  • Possible values: mbpp, cruxeval_input_prediction, cruxeval_output_prediction

• --model_type: Specifies the type of foundation model to be used for PEFT.

  • Possible values: phi-2, phi-3, codegen-350M, codegen2-3_7B, deepseek-coder-1.3b-base, deepseek-coder-7b-base, Meta-Llama-3-8B

• --enc_model_type: Specifies the type of encoder model to be used in lopa or idpg.

  • Possible values: codebert-base, codesage-small, codesage-base, codesage-large

• --num_virtual_tokens: Length of soft prompt (=m)

  • Example: 5, 10, 25

• --lp_rank: Low-Rank for matrix factorization in LOPA (=r)

  • Example: 1, 2, 4

• --num_epochs: Number of epochs to train the model.

  • Example: 10

• --per_gpu_train_batch_size: Number of training samples per GPU.

  • Example: 2

• --lr: Learning rate for the optimizer.

  • Example: 0.001 used for PT-based methods, 0.0001 used for LoRA and 0.00001 used for FFT.

• --log_dir: Directory to save logs. By default, the current timestamp is used as the name of the directory.

  • Example: ./logs

• --wandb_logging: Flag to enable logging to Weights and Biases.

Sample Command

Here is a sample command that tunes phi-2 for MBPP using LOPA with 10 virtual tokens and rank 1:

python tune_foundation_model.py --peft_method lopa --task_name mbpp --model_type phi-2 --enc_model_type codesage-small --num_virtual_tokens 10 --lp_rank 1 --num_epochs 10 --per_gpu_train_batch_size 2 --lr 0.001

Using Huggingface Accelerator

For using accelerator. Here is an example command that uses deepspeed-stage2 with accelerate:

accelerate launch --config_file config_files/config_ds_zero_stage2_no_fp16.yaml tune_foundation_model.py

Requirements:

• Setup .yaml configuration file for the experiment. Example: config_ds_zero_stage2_no_fp16.yaml
• Provide path to deepspeed-stage2 configuration file in the .yaml file. Example: zero_stage2_nofp16_config.json

Use the following link for more details: Huggingface Accelerator

Full Fine-Tuning (FFT)

We provide a separate script for full fine-tuning tune_fft_baseline.py

Recommendation: Use Deepspeed-stage3 for FFT training to tune large models.

deepspeed tune_fft_baseline.py --path_to_ds_config config_files/zero_stage3_config.json --fp16 True --gradient_accumulation_steps 2

Requirements:

• Setup deepspeed configuration file for the experiment. Example: zero_stage3_config.json

---

Evaluating and Getting Results

To evaluate the model, you need to generate predictions using generate_preds.py script.

Sample Command

Here is a sample command that generates predictions for phi-2 tuned on MBPP using LOPA with 10 virtual tokens and rank 1:

accelerate launch generate_preds.py --peft_method lopa --task_name mbpp --model_type phi-2 --enc_model_type codesage-small --num_virtual_tokens 10 --lp_rank 1

Additional Arguments Needed

Following arguments are needed to load the weights for the peft method.

• --load_adapter_from: Path to directory containing the adapter weights for the foundation model. (Used by pt, lora, idpg, lopa)
• --clf_predictor_path: Path to the encoder model weights for. (Used by lopa, idpg)
• --load_base_from_path: Path to the base model weights. (Used by fft for un-sharded checkpoints)
• --sharded_checkpoint_dir: Path to the sharded checkpoint directory. (Used by fft)

Post-Processing

Predictions of foundation models need to be post-processed before evaluation.

To run post-processing for MBPP, use the following command:

python postprocess_mbpp_preds.py --path "$path_to_mbxp_solutions_json"

To run post-processing for CruxEval-I, use the following command:

python postprocess_cruxeval_preds.py --path "$path_to_output_raw_json" --mode input

The processed predictions will be saved in the same directory as a different file.

Running Predictions

Requirements:

• Setup the MBXP evaluation suite. Based of Amazon Science/mxeval. pip install -e mxeval
• Setup the CruxEval evaluation suite. Based of Facebook Research/CRUXEval. cd cruxeval && pip install -r requirements.txt

To evaluate predictions for MBPP, use the following command:

evaluate_functional_correctness "$path_to_mbxp_solutions_post_processed" --problem_file mxeval/mbpp_test_release_v1.jsonl

To evaluate predictions for CruxEval-I, use the following command:

python cruxeval/evaluation/evaluate_generations.py --generations_path "$path_to_output_json" --scored_results_path "$path_to_output_scored_json" --mode input

---

Results

We provide the sample results (pass@1) of running different PEFT methods phi-2 across different tasks. For rest of the results, please refer to the paper.

Tuning Method	CruxEval-I	CruxEval-O	MBPP
None	33.5	33.0	45.17
FFT	40.2	37.0	55.03
LoRA	41.5	42.5	51.54
PT	35.0	34.0	49.69
IDPG	35.0	33.0	53.29
LOPA	43.0	37.2	52.15

---

Contributing

We welcome contributions to the project. Please raise an issue or submit a pull request.

---

References

To run larger models, we recommend using the following resources: Huggingface GPU Inference

Citation

@article{jain2024prompt,
  title={Prompt Tuning Strikes Back: Customizing Foundation Models with Low-Rank Prompt Adaptation},
  author={Jain, Abhinav and Chaudhuri, Swarat and Reps, Thomas and Jermaine, Chris},
  journal={arXiv preprint arXiv:2405.15282},
  year={2024}
}