riakzabexample
April 14, 2011 ยท View on GitHub
Quick Start
Assuming you already have Erlang installed, clone this repository, and build it: make. Assuming all goes well, build a development release: make devrel.
Now, you can play around with things. For simplicity, I'm going to assume you're running within a X session and have xterm. Other scenarios are left as an exercise to the reader.
Start four Erlang nodes running riak_zab_example:
> xterm -hold -e './dev/dev1/bin/riak_zab_example console' &
> xterm -hold -e './dev/dev2/bin/riak_zab_example console' &
> xterm -hold -e './dev/dev3/bin/riak_zab_example console' &
> xterm -hold -e './dev/dev4/bin/riak_zab_example console' &
Join the four nodes into a single cluster. Joining all four nodes together sometimes results in riak_core making an unbalanced ring. This doesn't seem to occur if we first build a three node cluster, then add the fourth node. Note: You'll want to ensure that ringready returns TRUE (as shown) before moving to the next step.
> ./dev/dev1/bin/riak-zab-admin join dev2@127.0.0.1
Sent join request to dev2@127.0.0.1
> ./dev/dev2/bin/riak-zab-admin join dev3@127.0.0.1
Sent join request to dev3@127.0.0.1
> ./dev/dev3/bin/riak-zab-admin join dev1@127.0.0.1
Sent join request to dev1@127.0.0.1
> ./dev/dev1/bin/riak-zab-admin ringready
TRUE All nodes agree on the ring ['dev1@127.0.0.1','dev2@127.0.0.1',
'dev3@127.0.0.1']
> ./dev/dev4/bin/riak-zab-admin join dev1@127.0.0.1
Sent join request to dev1@127.0.0.1
> ./dev/dev4/bin/riak-zab-admin ringready
TRUE All nodes agree on the ring ['dev1@127.0.0.1','dev2@127.0.0.1',
'dev3@127.0.0.1','dev4@127.0.0.1']
Fire up Zab on all the nodes.
> ./dev/dev1/bin/riak-zab-admin zab-up
> ./dev/dev2/bin/riak-zab-admin zab-up
> ./dev/dev3/bin/riak-zab-admin zab-up
> ./dev/dev4/bin/riak-zab-admin zab-up
Assuming all goes well, you should see a few info messages on the node consoles that end with different ensembles successfully electing a leader. If the ring ended up being balanced, you should have a riak_zab state similar to the following.
> ./dev/dev1/bin/riak-zab-admin info
================================ Riak Zab Info ================================
Ring size: 64
Ensemble size: 3
Nodes: ['dev1@127.0.0.1','dev2@127.0.0.1','dev3@127.0.0.1',
'dev4@127.0.0.1']
================================== Ensembles ==================================
Ensemble Ring Leader Nodes
-------------------------------------------------------------------------------
1 25.0% dev2@127.0.0.1 ['dev1@127.0.0.1',
'dev2@127.0.0.1',
'dev3@127.0.0.1']
-------------------------------------------------------------------------------
2 25.0% dev2@127.0.0.1 ['dev1@127.0.0.1',
'dev2@127.0.0.1',
'dev4@127.0.0.1']
-------------------------------------------------------------------------------
3 25.0% dev3@127.0.0.1 ['dev1@127.0.0.1',
'dev3@127.0.0.1',
'dev4@127.0.0.1']
-------------------------------------------------------------------------------
4 25.0% dev3@127.0.0.1 ['dev2@127.0.0.1',
'dev3@127.0.0.1',
'dev4@127.0.0.1']
-------------------------------------------------------------------------------
Up to this point you're dealing with standard riak_core / riak_zab. Now, let's play around a bit with the command set provided by riak_zab_example. The example app implements a simple list based log. There is a store command that appends elements to a list, and a get command that retrieves the current list. In your Erlang consoles, you can use commands in the following form:
riak_zab_util:command(100, {store, 100, 1}, riak_zabexample_vnode_master).
riak_zab_util:command(100, {store, 100, 6}, riak_zabexample_vnode_master).
riak_zab_util:command(200, {store, 200, 1}, riak_zabexample_vnode_master).
riak_zab_util:command(200, {store, 200, 6}, riak_zabexample_vnode_master).
riak_zab_util:sync_command(100, {get, 100}, riak_zabexample_vnode_master).
riak_zab_util:sync_command(200, {get, 200}, riak_zabexample_vnode_master).
Feel free to kill/restart nodes as desired, as well as send commands while a node is down and see what happens when the node restarts. For more verbose output, you can modify the riak_zab source in deps/riak_zab/src and enable all the DOUT defines to print output to the console and recompile. This should probably be made easier in the future.