Spawned API Guide

Complete reference for the spawned actor framework. For a quick introduction, see the README.

Table of Contents

• Actor Lifecycle
• Context
• ActorRef
• Backend Selection (tasks mode)
• Timers
• send_message_on
• spawn_listener
• Type Erasure: Recipient and Receiver
• Registry
• Response<T>
• Message Trait
• Error Handling
• spawned-rt

---

Actor Lifecycle

Every actor goes through three phases:

1. started() — called once before the actor begins processing messages. Use this for initialization: starting timers, registering with the registry, etc.
2. Message loop — the actor processes messages one at a time via Handler<M> implementations.
3. stopped() — called once after the message loop exits. Use this for cleanup.

#[actor(protocol = MyProtocol)]
impl MyActor {
    #[started]
    async fn started(&mut self, ctx: &Context<Self>) {
        // Start a periodic timer
        send_interval(Duration::from_secs(10), ctx.clone(), Tick);
    }

    #[stopped]
    async fn stopped(&mut self, _ctx: &Context<Self>) {
        tracing::info!("actor shutting down");
    }

    #[send_handler]
    async fn handle_tick(&mut self, _msg: Tick, _ctx: &Context<Self>) {
        // periodic work
    }
}

Panic Recovery

All three phases are wrapped in catch_unwind:

• Panic in started() — the actor stops immediately. No messages are processed, stopped() is not called.
• Panic in a handler — the current message is lost. The actor stops and stopped() is called.
• Panic in stopped() — the panic is logged but join() still returns normally.

In all cases, join() will eventually return and subsequent send()/request() calls return Err(ActorStopped).

Stopping an Actor

Call ctx.stop() from inside a handler or lifecycle hook. This cancels the actor's internal token, causing the message loop to exit after the current handler finishes.

From outside, there is no direct stop method on ActorRef. Design your protocol with an explicit shutdown message, or use ctx.stop() from within the actor.

---

Context

Context<A> is the handle passed to every handler and lifecycle hook. It provides access to the actor's own mailbox and lifecycle controls.

Method	Description
ctx.stop()	Signal the actor to stop after the current handler finishes
ctx.send(msg)	Send a fire-and-forget message to this actor (self-send)
ctx.request(msg)	Send a request and wait for the reply (tasks: async, threads: blocking)
ctx.request_with_timeout(msg, duration)	Send a request with a custom timeout
ctx.request_raw(msg)	Send a request and get a raw oneshot receiver
ctx.recipient::<M>()	Get a type-erased Recipient<M> for this actor
ctx.actor_ref()	Get an ActorRef<A> from the context

Context::from_ref(&actor_ref) creates a context from an ActorRef, useful for setting up timers or stream listeners from outside the actor.

Self-scheduling example

#[send_handler]
async fn handle_tick(&mut self, _msg: Tick, ctx: &Context<Self>) {
    self.do_work();
    // Schedule the next tick
    send_after(Duration::from_secs(5), ctx.clone(), Tick);
}

---

ActorRef

ActorRef<A> is the external handle to a running actor. Cloneable, Send + Sync.

Method	Description
actor_ref.send(msg)	Fire-and-forget. Returns Result<(), ActorError>
actor_ref.request(msg)	Request with default 5s timeout. Tasks: .await, Threads: blocking
actor_ref.request_with_timeout(msg, duration)	Request with custom timeout
actor_ref.request_raw(msg)	Returns a raw oneshot receiver
actor_ref.recipient::<M>()	Get a type-erased Recipient<M>
actor_ref.context()	Get a Context<A> (for timer setup, etc.)
actor_ref.join()	Wait until the actor has fully stopped (tasks: .await, threads: blocking)

Starting an actor

use spawned_concurrency::tasks::ActorStart as _;

let actor_ref = MyActor::new().start();

// tasks mode: choose a backend
let actor_ref = MyActor::new().start_with_backend(Backend::Thread);

---

Backend Selection (tasks mode)

The Backend enum controls where the actor's message loop runs. Only available in tasks mode.

Backend	When to use
Backend::Async (default)	Standard async actors. Runs on the tokio runtime. Handlers must not block.
Backend::Blocking	Actors that do blocking I/O (file system, synchronous HTTP). Runs on tokio's blocking thread pool.
Backend::Thread	CPU-bound work or full isolation. Runs on a dedicated OS thread with its own tokio runtime.

// Default — async on tokio
let a = MyActor::new().start();

// Blocking I/O
let b = MyActor::new().start_with_backend(Backend::Blocking);

// Dedicated thread
let c = MyActor::new().start_with_backend(Backend::Thread);

Backend::Async will emit a tracing warning (debug builds only) if a poll takes longer than 10ms — use Backend::Blocking or Backend::Thread for slow work.

---

Timers

Timers send messages to actors after a delay or at regular intervals.

send_after

Sends a single message after a delay.

use spawned_concurrency::tasks::{send_after, Context};

// Inside a handler or started()
let timer = send_after(Duration::from_secs(5), ctx.clone(), MyMessage);

// Cancel before it fires
timer.cancellation_token.cancel();

send_interval

Sends a message repeatedly at a fixed interval. The message type must implement Clone.

use spawned_concurrency::tasks::send_interval;

let timer = send_interval(Duration::from_secs(1), ctx.clone(), Tick);

// Stop the interval
timer.cancellation_token.cancel();

TimerHandle

Both functions return a TimerHandle with two public fields:

• join_handle — the spawned task/thread handle
• cancellation_token — cancel the timer before it fires (or stop an interval)

Timers are automatically cancelled when the actor stops.

---

send_message_on

Sends a message to an actor when an external event completes.

Tasks mode — takes a Future:

use spawned_concurrency::tasks::send_message_on;

// Send Shutdown to the actor when ctrl_c resolves
send_message_on(ctx, rt::ctrl_c(), Shutdown);

// Send DataReady after an async operation completes
send_message_on(ctx, fetch_data(), DataReady);

Threads mode — takes a FnOnce() closure:

use spawned_concurrency::threads::send_message_on;

// Send Shutdown when the closure returns (blocking call)
send_message_on(ctx, rt::ctrl_c(), Shutdown);

If the actor stops before the event completes, the message is not sent.

---

spawn_listener

Forwards items from a stream (tasks) or iterator (threads) to an actor as messages.

Tasks mode — takes an async Stream:

use spawned_concurrency::tasks::spawn_listener;

let stream = ReceiverStream::new(rx);
let handle = spawn_listener(ctx, stream);

Threads mode — takes an IntoIterator:

use spawned_concurrency::threads::spawn_listener;

let items = vec![Push { value: 1 }, Push { value: 2 }];
let handle = spawn_listener(ctx, items);

The listener stops when:

• The stream/iterator is exhausted
• The actor stops (cancellation token is triggered)
• Sending to the actor's mailbox fails

---

Type Erasure: Recipient and Receiver

When you need to send a specific message type to an actor without knowing its concrete type, use Recipient<M>.

pub type Recipient<M> = Arc<dyn Receiver<M>>;

Receiver<M> is the object-safe trait that provides send() and request_raw() for a single message type.

Getting a Recipient

let recipient: Recipient<Notify> = actor_ref.recipient();
// or from inside a handler:
let recipient: Recipient<Notify> = ctx.recipient();

Using a Recipient

// Fire-and-forget
recipient.send(Notify { text: "hello".into() })?;

// Request with timeout (tasks mode)
let result = request(&*recipient, GetCount, Duration::from_secs(5)).await?;

// Request with timeout (threads mode)
let result = request(&*recipient, GetCount, Duration::from_secs(5))?;

When to use

• Passing actor references to other actors without exposing the concrete type
• Storing heterogeneous actor references in collections
• Cross-module boundaries where you want to depend on a message type, not an actor type

Note: For most cases, protocol-generated XRef types (e.g., NameServerRef = Arc<dyn NameServerProtocol>) are a better fit since they expose the full protocol interface. Recipient<M> is the escape hatch for single-message type erasure.

---

Registry

Global name-based registry for discovering actors at runtime. Stores any Clone + Send + Sync + 'static value.

use spawned_concurrency::registry;

Function	Description
registry::register(name, value)	Register a value by name. Returns Err(AlreadyRegistered) if the name is taken.
registry::whereis::<T>(name)	Look up a value by name. Returns None if not found or wrong type.
registry::unregister(name)	Remove a registration.
registry::registered()	List all registered names.

Example

// Register a protocol reference
let ns_ref = ns.to_name_server_ref();
registry::register("name_server", ns_ref)?;

// Look it up elsewhere
let ns: Option<NameServerRef> = registry::whereis("name_server");
if let Some(ns) = ns {
    let result = ns.find("Joe".into()).await.unwrap();
}

The registry uses Any-based downcasting, so whereis returns None if the stored type doesn't match the requested type.

---

Response<T>

Response<T> is the return type for protocol request methods. It works in both execution modes:

• Tasks mode — wraps a oneshot receiver. Use .await to get Result<T, ActorError>.
• Threads mode — wraps a pre-computed result. Use .unwrap() or .expect() directly.

Methods (sync, for threads mode)

Method	Description
.unwrap()	Extract the value, panic on error
.expect(msg)	Extract the value, panic with custom message on error
.is_ok()	Returns true if the response contains Ok
.is_err()	Returns true if the response contains Err
.map(f)	Transform the inner value if Ok

Async usage (tasks mode)

// .await returns Result<T, ActorError>
let result = ns.find("Joe".into()).await.unwrap();

Sync usage (threads mode)

// .unwrap() extracts the value directly
let result = ns.find("Joe".into()).unwrap();

Response::ready(result) creates a pre-computed response — this is what the #[protocol] macro generates for threads-mode blanket impls.

---

Message Trait

The Message trait defines a message type and its expected reply type:

pub trait Message: Send + 'static {
    type Result: Send + 'static;
}

You rarely need to implement this manually — #[protocol] generates message structs that implement Message automatically. For cases where you need a standalone message without a protocol:

struct Ping;
impl Message for Ping {
    type Result = ();
}

struct GetCount;
impl Message for GetCount {
    type Result = u64;
}

---

Error Handling

All actor communication can fail with ActorError:

pub enum ActorError {
    ActorStopped,    // The actor has stopped or its mailbox is closed
    RequestTimeout,  // A request exceeded the timeout (default 5s)
}

• send() returns Err(ActorStopped) if the actor has stopped.
• request() returns Err(ActorStopped) if the actor stops before replying, or Err(RequestTimeout) if the reply doesn't arrive in time.
• request_with_timeout() lets you specify a custom timeout.

---

spawned-rt

spawned-rt provides runtime abstractions used by spawned-concurrency. Users import it for run(), sleep(), and signal handling.

tasks module (spawned_rt::tasks)

Wraps tokio primitives:

Item	Description
run(future)	Create a tokio runtime, initialize tracing, and block on the future
block_on(future)	Block on a future using the current tokio runtime handle
spawn(future)	Spawn an async task
spawn_blocking(f)	Spawn a blocking closure on tokio's blocking pool
sleep(duration)	Async sleep
timeout(duration, future)	Wrap a future with a timeout
Runtime	Tokio runtime (re-export)
JoinHandle	Handle to a spawned task
CancellationToken	Cooperative cancellation (from tokio-util)
mpsc	Multi-producer, single-consumer channel
oneshot	Single-use channel
watch	Watch channel for broadcasting state changes
ctrl_c()	Returns a future that resolves on Ctrl+C

threads module (spawned_rt::threads)

Wraps standard library primitives:

Item	Description
run(f)	Initialize tracing and call f()
block_on(future)	Create a temporary tokio runtime and block on a future
spawn(f)	Spawn an OS thread
sleep(duration)	Block the current thread
JoinHandle	Handle to a spawned thread
CancellationToken	Cooperative cancellation with callback support via on_cancel()
mpsc	Multi-producer, single-consumer channel (wraps std::sync::mpsc)
oneshot	Single-use channel (wraps std::sync::mpsc)
ctrl_c()	Returns a closure that blocks until Ctrl+C. Supports multiple subscribers.

Choosing tasks vs threads

Use tasks when you need async I/O, high actor counts (thousands), or integration with async libraries.

Use threads when you want simplicity, no async runtime, or CPU-bound actors that benefit from dedicated OS threads. Each actor gets its own thread, so this mode works best with a moderate number of actors.

Both modes provide the same Actor, Handler<M>, ActorRef<A>, and Context<A> types. Switching requires changing imports and adding/removing async/.await on handlers and lifecycle hooks.