OpenSubdiv

July 12, 2025 ยท View on GitHub

Environment Setup

Before building USD, set up your environment variables according to your platform. You can customize these paths to match your specific setup.

Environment Variables Overview

  • USD_SOURCE_DIR: Location of the USD source code
  • USD_DEPS_DIR: Directory for building and installing dependencies
  • USD_BUILD_DIR: Directory for building USD
  • USD_INSTALL_DIR: Directory where USD will be installed
  • USD_PYTHON_ROOT: Base directory of your Python installation
  • USD_PYTHON_EXE: Path to the Python executable

MacOS Environment

# Set up environment variables for paths, adjust as necessary.
export USD_SOURCE_DIR=~/dev/OpenUSD               # USD source code location
export USD_DEPS_DIR=/var/tmp/usd-test/__deps      # Dependencies directory
export USD_BUILD_DIR=/var/tmp/usd-build           # USD build directory
export USD_INSTALL_DIR=${USD_BUILD_DIR}/install   # USD installation directory
export USD_PYTHON_ROOT=/usr/local/bin             # Python installation directory
export USD_PYTHON_EXE=${USD_PYTHON_ROOT}/python   # Python executable

# Create necessary directories
mkdir -p ${USD_DEPS_DIR}
mkdir -p ${USD_DEPS_DIR}/install
mkdir -p ${USD_BUILD_DIR}

Windows Environment

:: Set up environment variables for paths
:: Adjust these paths according to your setup
set USD_SOURCE_DIR=%USERPROFILE%\dev\OpenUSD      :: USD source code location
set USD_DEPS_DIR=%USERPROFILE%\dev\deps           :: Dependencies directory
set USD_BUILD_DIR=%USERPROFILE%\dev\build\usd     :: USD build directory
set USD_INSTALL_DIR=%USD_BUILD_DIR%\install       :: USD installation directory
set USD_PYTHON_ROOT=%LOCALAPPDATA%\Programs\Python\Python39  :: Python installation directory
set USD_PYTHON_EXE=%USD_PYTHON_ROOT%\python.exe   :: Python executable

:: Create necessary directories
mkdir %USD_DEPS_DIR%
mkdir %USD_DEPS_DIR%\install
mkdir %USD_BUILD_DIR%

Linux Environment

# Set up environment variables for paths
export USD_SOURCE_DIR=~/dev/OpenUSD               # USD source code location
export USD_DEPS_DIR=~/deps                        # Dependencies directory
export USD_BUILD_DIR=~/build/usd                  # USD build directory
export USD_INSTALL_DIR=~/install/USD              # USD installation directory

# Python path - adjust based on your distribution and Python version
# For system Python:
export USD_PYTHON_ROOT=/usr/bin
export USD_PYTHON_EXE=${USD_PYTHON_ROOT}/python3
# For conda environments (uncomment if using conda):
#export USD_PYTHON_ROOT=$CONDA_PREFIX
#export USD_PYTHON_EXE=${USD_PYTHON_ROOT}/bin/python

# Create necessary directories
mkdir -p ${USD_DEPS_DIR}
mkdir -p ${USD_DEPS_DIR}/install
mkdir -p ${USD_BUILD_DIR}

Toolchain

  • git
  • cmake 3.26 or greater installed for the command line
  • For MacOS: Xcode command line tools

Building Dependencies

MacOS and Linux Prerequisites

# Change to dependencies directory
cd ${USD_DEPS_DIR}

# OneTBB
curl -L https://github.com/oneapi-src/oneTBB/archive/refs/tags/v2021.9.0.zip --output oneTBB-2021.9.0.zip
unzip oneTBB-2021.9.0.zip && mv oneTBB-2021.9.0/ oneTBB
cd oneTBB && mkdir -p build && cd build
cmake .. -DTBB_TEST=OFF -DTBB_STRICT=OFF -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=${USD_DEPS_DIR}/install
cmake --build . --config Release && cmake --install .
cd ../..

# OpenSubdiv
curl -L https://github.com/PixarAnimationStudios/OpenSubdiv/archive/v3_6_0.zip --output OpenSubdiv.3.6.0.zip
unzip OpenSubdiv.3.6.0.zip && mv OpenSubdiv-3_6_0/ OpenSubdiv
cd OpenSubdiv && mkdir build && cd build
cmake .. -DNO_OPENGL=ON -DNO_EXAMPLES=ON -DNO_TUTORIALS=ON -DNO_REGRESSION=ON -DNO_DOC=ON -DNO_OMP=ON -DNO_CUDA=ON -DNO_OPENCL=ON -DNO_DX=ON -DNO_TESTS=ON -DNO_GLEW=ON -DNO_GLFW=ON -DNO_PTEX=ON -DNO_TBB=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=${USD_DEPS_DIR}/install
cmake --build . --config Release && cmake --install .
cd ../..

Building USD with CMake

MacOS Build (With Python)

cmake ${USD_SOURCE_DIR} -G Xcode -DCMAKE_INSTALL_PREFIX=${USD_INSTALL_DIR} -DPython3_ROOT="${USD_PYTHON_ROOT}" -DPython3_EXECUTABLE="${USD_PYTHON_EXE}"

MacOS Build (No Python)

Note that we may point to the python for tools to use even though we are building USD without python runtime support.

First, delete cmake/modules/FindOpenSubdiv.cmake as it is not compatible with the cmake config file OpenSubdiv installs.

cd ${USD_BUILD_DIR}

cmake ${USD_SOURCE_DIR} -G Xcode -DCMAKE_INSTALL_PREFIX=${USD_INSTALL_DIR} -DPython3_ROOT="${USD_PYTHON_ROOT}" -DPython3_EXECUTABLE="${USD_PYTHON_EXE}" -DPXR_ENABLE_PYTHON_SUPPORT=OFF -DCMAKE_PREFIX_PATH=${USD_DEPS_DIR}/install -DTBB_ROOT=${USD_DEPS_DIR}/install

Building USD with build_usd.py

MacOS Dynamic Framework (No Python)

# Build USD without Python support
${USD_PYTHON_EXE} ${USD_SOURCE_DIR}/build_scripts/build_usd.py \
    --generator Xcode \
    --tests \
    --no-python \
    --no-openimageio \
    --opencolorio \
    --build-variant relwithdebuginfo \
    ${USD_BUILD_DIR} \
    | grep -v -e "note: Run script build phase" \
              -e "RegisterExecutionPolicyException" \
              -e "PhaseScriptExecution" \
              -e "ClangStatCache" \
              -e "    cd" \
              -e "note: Removed stale file" \
              -e "ProcessProductPackaging"

MacOS Dynamic Framework (With Python)

# Build USD with Python support
${USD_PYTHON_EXE} ${USD_SOURCE_DIR}/build_scripts/build_usd.py \
    --generator Xcode \
    --tests \
    --no-openimageio \
    --opencolorio \
    --build-variant relwithdebuginfo \
    ${USD_BUILD_DIR} \
    | grep -v -e "note: Run script build phase" \
              -e "RegisterExecutionPolicyException" \
              -e "PhaseScriptExecution" \
              -e "ClangStatCache" \
              -e "    cd" \
              -e "note: Removed stale file" \
              -e "ProcessProductPackaging"

Windows Build

:: Build USD without Python support
%USD_PYTHON_EXE% %USD_SOURCE_DIR%\build_scripts\build_usd.py ^
    --no-openimageio ^
    --opencolorio ^
    --no-python ^
    --build-variant=relwithdebuginfo ^
    %USD_BUILD_DIR%

Ubuntu Build

First, install required system dependencies:

sudo apt install libx11-dev libxt-dev libxrandr-dev

Set up Python environment:

  1. Create a venv or conda environment
  2. Install required packages: 
    pip install PySide6 pyopengl

Build USD without Python support:

${USD_PYTHON_EXE} ${USD_SOURCE_DIR}/build_scripts/build_usd.py \
    --no-python \
    ${USD_INSTALL_DIR}

Note: If build fails, modify src/oneTBB-2020.3.1/build/common.inc to add detection for "linux" in addition to "Linux"

Build USD with Python support (requires Python development libraries):

${USD_PYTHON_EXE} ${USD_SOURCE_DIR}/build_scripts/build_usd.py \
    ${USD_INSTALL_DIR}

Note: Ensure your conda environment includes the appropriate Python development libraries (e.g., python3.12.a)

Additional Configuration

Xcode Debugging Setup

To configure Xcode for USD development:

  1. Edit Scheme > Arguments
  2. Add a USD_INSTALL_DIR environment variable corresponding to the set up above.
  3. Add the PXR_PLUGINPATH_NAME variable so plugins will be discovered: 
    PXR_PLUGINPATH_NAME=${USD_INSTALL_DIR}/lib/usd

Double check your work

There is an executable in the bin directory called sdfdump. Running it should result in the executable describing its input arguments, without any complaints of missing dylibs.

TinyUsd

Go back into the packages directory we made earlier, and create a tinyusd-build directory, and cd into it.

mkdir tinyusd-build && cd tinyusd-build

Then, configure the cmake build files. Once again, make sure the INSTALL_PREFIX and TOOLCHAIN variables are pointed appropriately.

cmake -G "Xcode" ../.. -DCMAKE_INSTALL_PREFIX=.. -DCMAKE_PREFIX_PATH=$USD_INSTALL_DIR

Build tinyusd.

cmake --build . --config Release --target install

Haven't got the rpath installation set up correctly in the cmake file yet, so go to the bin directory, and add it.

cd ../bin
install_name_tool -add_rpath ../lib tinyusd

Now, run tinyusd.

./tinyusd

Sanity check that tinyusd generated a file named test.usd, containing the following:

#usda 1.0

def Cube "Box"
{
    float3 xformOp:scale = (5, 5, 5)
    uniform token[] xformOpOrder = ["xformOp:scale"]
}