Hoverbot BOM
November 9, 2024 ยท View on GitHub
- 3D printed parts (all designed for Prusament PETG with a Prusa MK3s and 0.6mm nozzle)
- Electronics
- Connectors and cabling
- 3x 30cm PH3 cable
- 3x XT30 power cables, each with
- 1x XT30 Male
- 1x XT30 Female
- ~30cm 18 AWG silicone wire
- heat shrink tubing
- 2x motor wiring, each with
- 1x MR30 connector pairs
- 1x GH7 housings
- 5x GH pre-crimped wires
- small heat shrink tubing
- Power cable
- XT90S
- ~20cm 16 AWG silicone wire
- Battery mount
- Hardware
- 28x M3 heat set inserts / 94180A331
- 18x in base
- 10x in chassis
- 8x M2.5 heat set inserts / 94180A321
- 8x in chassis
- 16x M2.5x5 bolts / 91292A009
- 8x for moteus-c1
- 4x for power_dist
- 4x for pi3hat
- 26x M3x8 bolt 91292A112
- 8x for motors
- 4x for base cover
- 4x for chassis cover
- 4x for chassis
- 6x for battery mounts
- 28x M3 heat set inserts / 94180A331