MatrixCOS - Esp32 HUB75 Matrix

develop by OpenOn.org

This Application based on

• Use CmdOS V0.1.0
• GFXDisplayCOS

This is a ESP32 based Applciation to display information via HUB75 Matrix display.

It a christmas projet inspired by eely-HoDi Make Articel

Example animation gif frame

Display images as a pixel frame

Example alarm sign

draw alarm sign alarm.cmd

Example toilet sign

draw toilet sign signToilet.cmd

Fire and Exit

draw fire and exit sign fireAndExit.cmd

Digital wash information

washer example wash.cmd (e.g. use by read $m from tasmota or shelly plug and show wash if acutal power > 10 and done if actual power < 5)

Room

Next please in room X room.cmd

Example Home Assistant / Shelly / Mqtt

Display power values of a shelly EM (via MQTT)

mqttAttr shellies/shellyem3/emeter/0/power 1
mqttAttr shellies/shellyem3/emeter/1/power 1 
mqttAttr shellies/shellyem3/emeter/2/power 1
#loop
  drawClear
  drawColor 15 15 15
  drawText 5 1 1 "Shelly EM"
  drawColor 15 0 0 
  valueFull 1 12 "Power0" $shellies/shellyem3/emeter/0/power 1000 888 444
  valueFull 1 30 "Power1" $shellies/shellyem3/emeter/1/power 1000 888 444
  valueFull 1 47 "Power2" $shellies/shellyem3/emeter/2/power 1000 888 444
  draw
  wait 2000
  goto #loop

Effects

Effects

Command Examples

command Examples

Feature

• Hardware install and config
• matrix commands
• web control
• mqtt control
• rest control
• autostart and timer
• multi display
• CmdOS Commands

Setup

matrix 64 64 1 90 0 0,15,4,16,27,17,5,18,19,21,12,33,25,22
matrix2 0 1 1 0

[Require Libs]

---

:warning: Attention: The use of information and programmes can be dangerous ! This is a private hobby project and makes no claim to completeness, runnability or compliance with regulations. Any use of this or referenced content is at your own risk and excludes any liability by authors.

---

a OpenOn.org project - develop by michael@openon.org

If you use/like this project please https://buymeacoffee.com/openon (a good choise is 1Euro per Device ;-)