Documentation for scw lb

March 26, 2026 · View on GitHub

This API allows you to manage your Scaleway Load Balancer services.

Access Control List (ACL) management commands
Backend management commands
TLS certificate management commands
Frontend management commands
IP management commands
Load balancer management commands
Load balancer types management commands
- List all Load Balancer offer types
Private networks management commands
Route rules management commands
Subscriber management commands

Access Control List (ACL) management commands

Access Control List (ACL) management commands.

Create an ACL for a given frontend

Create a new ACL for a given frontend. Each ACL must have a name, an action to perform (allow or deny), and a match rule (the action is carried out when the incoming traffic matches the rule).

Usage:

scw lb acl create [arg=value ...]

Args:

Name		Description
frontend-id	Required	Frontend ID to attach the ACL to
name	Required Default: `<generated>`	ACL name
action.type	One of: `allow`, `deny`, `redirect`	Action to take when incoming traffic matches an ACL filter
action.redirect.type	One of: `location`, `scheme`	Redirect type
action.redirect.target		Redirect target. For a location redirect, you can use a URL e.g. `https://scaleway.com`. Using a scheme name (e.g. `https`, `http`, `ftp`, `git`) will replace the request's original scheme. This can be useful to implement HTTP to HTTPS redirects. Valid placeholders that can be used in a `location` redirect to preserve parts of the original request in the redirection URL are {{host}}, {{query}}, {{path}} and {{scheme}}
action.redirect.code		HTTP redirect code to use. Valid values are 301, 302, 303, 307 and 308. Default value is 302
match.ip-subnet.{index}		List of IPs or CIDR v4/v6 addresses to filter for from the client side
match.ips-edge-services		Defines whether Edge Services IPs should be matched
match.http-filter	One of: `acl_http_filter_none`, `path_begin`, `path_end`, `regex`, `http_header_match`	Type of HTTP filter to match. Extracts the request's URL path, which starts at the first slash and ends before the question mark (without the host part). Defines where to filter for the http_filter_value. Only supported for HTTP backends
match.http-filter-value.{index}		List of values to filter for
match.http-filter-option		Name of the HTTP header to filter on if `http_header_match` was selected in `http_filter`
match.invert		Defines whether to invert the match condition. If set to `true`, the ACL carries out its action when the condition DOES NOT match
index	Required	Priority of this ACL (ACLs are applied in ascending order, 0 is the first ACL executed)
description		ACL description
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete an ACL

Delete an ACL, specified by its ACL ID. Deleting an ACL is irreversible and cannot be undone.

Usage:

scw lb acl delete <acl-id ...> [arg=value ...]

Args:

Name		Description
acl-id	Required	ACL ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get an ACL

Get information for a particular ACL, specified by its ACL ID. The response returns full details of the ACL, including its name, action, match rule and frontend.

Usage:

scw lb acl get <acl-id ...> [arg=value ...]

Args:

Name		Description
acl-id	Required	ACL ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List ACLs for a given frontend

List the ACLs for a given frontend, specified by its frontend ID. The response is an array of ACL objects, each one representing an ACL that denies or allows traffic based on certain conditions.

Usage:

scw lb acl list [arg=value ...]

Args:

Name		Description
frontend-id	Required	Frontend ID (ACLs attached to this frontend will be returned in the response)
order-by	One of: `created_at_asc`, `created_at_desc`, `name_asc`, `name_desc`	Sort order of ACLs in the response
name		ACL name to filter for
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Define all ACLs for a given frontend

For a given frontend specified by its frontend ID, define and add the complete set of ACLS for that frontend. Any existing ACLs on this frontend will be removed.

Usage:

scw lb acl set [arg=value ...]

Args:

Name		Description
acls.{index}.name	Required	ACL name
acls.{index}.action.type	One of: `allow`, `deny`, `redirect`	Action to take when incoming traffic matches an ACL filter
acls.{index}.action.redirect.type	One of: `location`, `scheme`	Redirect type
acls.{index}.action.redirect.target		Redirect target. For a location redirect, you can use a URL e.g. `https://scaleway.com`. Using a scheme name (e.g. `https`, `http`, `ftp`, `git`) will replace the request's original scheme. This can be useful to implement HTTP to HTTPS redirects. Valid placeholders that can be used in a `location` redirect to preserve parts of the original request in the redirection URL are {{host}}, {{query}}, {{path}} and {{scheme}}
acls.{index}.action.redirect.code		HTTP redirect code to use. Valid values are 301, 302, 303, 307 and 308. Default value is 302
acls.{index}.match.ip-subnet.{index}		List of IPs or CIDR v4/v6 addresses to filter for from the client side
acls.{index}.match.ips-edge-services		Defines whether Edge Services IPs should be matched
acls.{index}.match.http-filter	One of: `acl_http_filter_none`, `path_begin`, `path_end`, `regex`, `http_header_match`	Type of HTTP filter to match. Extracts the request's URL path, which starts at the first slash and ends before the question mark (without the host part). Defines where to filter for the http_filter_value. Only supported for HTTP backends
acls.{index}.match.http-filter-value.{index}		List of values to filter for
acls.{index}.match.http-filter-option		Name of the HTTP header to filter on if `http_header_match` was selected in `http_filter`
acls.{index}.match.invert		Defines whether to invert the match condition. If set to `true`, the ACL carries out its action when the condition DOES NOT match
acls.{index}.index	Required	Priority of this ACL (ACLs are applied in ascending order, 0 is the first ACL executed)
acls.{index}.description		ACL description
frontend-id	Required	Frontend ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Update an ACL

Update a particular ACL, specified by its ACL ID. You can update details including its name, action and match rule.

Usage:

scw lb acl update <acl-id ...> [arg=value ...]

Args:

Name		Description
acl-id	Required	ACL ID
name	Required	ACL name
action.type	One of: `allow`, `deny`, `redirect`	Action to take when incoming traffic matches an ACL filter
action.redirect.type	One of: `location`, `scheme`	Redirect type
action.redirect.target		Redirect target. For a location redirect, you can use a URL e.g. `https://scaleway.com`. Using a scheme name (e.g. `https`, `http`, `ftp`, `git`) will replace the request's original scheme. This can be useful to implement HTTP to HTTPS redirects. Valid placeholders that can be used in a `location` redirect to preserve parts of the original request in the redirection URL are {{host}}, {{query}}, {{path}} and {{scheme}}
action.redirect.code		HTTP redirect code to use. Valid values are 301, 302, 303, 307 and 308. Default value is 302
match.ip-subnet.{index}		List of IPs or CIDR v4/v6 addresses to filter for from the client side
match.ips-edge-services		Defines whether Edge Services IPs should be matched
match.http-filter	One of: `acl_http_filter_none`, `path_begin`, `path_end`, `regex`, `http_header_match`	Type of HTTP filter to match. Extracts the request's URL path, which starts at the first slash and ends before the question mark (without the host part). Defines where to filter for the http_filter_value. Only supported for HTTP backends
match.http-filter-value.{index}		List of values to filter for
match.http-filter-option		Name of the HTTP header to filter on if `http_header_match` was selected in `http_filter`
match.invert		Defines whether to invert the match condition. If set to `true`, the ACL carries out its action when the condition DOES NOT match
index	Required	Priority of this ACL (ACLs are applied in ascending order, 0 is the first ACL executed)
description		ACL description
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

For a given backend specified by its backend ID, add a set of backend servers (identified by their IP addresses) it should forward traffic to. These will be appended to any existing set of backend servers for this backend.

Usage:

scw lb backend add-servers <backend-id ...> [arg=value ...]

Args:

Name		Description
backend-id	Required	Backend ID
instance-server-id.{index}		UIID of the instance server.
instance-server-tag.{index}		Tag of the instance server.
use-instance-server-public-ip		Use public IP address of the instance instead of the private one
baremetal-server-id.{index}		UIID of the baremetal server.
baremetal-server-tag.{index}		Tag of the baremetal server.
server-ip.{index}	Required	List of IP addresses to add to backend servers
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Create a backend for a given Load Balancer

Create a new backend for a given Load Balancer, specifying its full configuration including protocol, port and forwarding algorithm.

Usage:

scw lb backend create [arg=value ...]

Args:

Name		Description
name	Required Default: `<generated>`	Name for the backend
forward-protocol	Required One of: `tcp`, `http`	Protocol to be used by the backend when forwarding traffic to backend servers
forward-port	Required	Port to be used by the backend when forwarding traffic to backend servers
forward-port-algorithm	Required Default: `roundrobin` One of: `roundrobin`, `leastconn`, `first`	Load balancing algorithm to be used when determining which backend server to forward new traffic to
sticky-sessions	Required Default: `none` One of: `none`, `cookie`, `table`	Defines whether to activate sticky sessions (binding a particular session to a particular backend server) and the method to use if so. None disables sticky sessions. Cookie-based uses an HTTP cookie TO stick a session to a backend server. Table-based uses the source (client) IP address to stick a session to a backend server
sticky-sessions-cookie-name		Cookie name for cookie-based sticky sessions
lb-id	Required	Load Balancer ID
health-check.port		Port to use for the backend server health check
health-check.check-delay	Default: `3s`	Time to wait between two consecutive health checks
health-check.check-timeout	Default: `1s`	Maximum time a backend server has to reply to the health check
health-check.check-max-retries		Number of consecutive unsuccessful health checks after which the server will be considered dead
health-check.mysql-config.user		MySQL user to use for the health check
health-check.pgsql-config.user		PostgreSQL user to use for the health check
health-check.http-config.uri		HTTP path used for the health check
health-check.http-config.method		HTTP method used for the health check
health-check.http-config.code		HTTP response code expected for a successful health check
health-check.http-config.host-header		HTTP host header used for the health check
health-check.https-config.uri		HTTP path used for the health check
health-check.https-config.method		HTTP method used for the health check
health-check.https-config.code		HTTP response code expected for a successful health check
health-check.https-config.host-header		HTTP host header used for the health check
health-check.https-config.sni		SNI used for SSL health checks
health-check.check-send-proxy		Defines whether proxy protocol should be activated for the health check
health-check.transient-check-delay	Default: `0.5s`	Time to wait between two consecutive health checks when a backend server is in a transient state (going UP or DOWN)
instance-server-id.{index}		UIID of the instance server.
instance-server-tag.{index}		Tag of the instance server.
use-instance-server-public-ip		Use public IP address of the instance instead of the private one
baremetal-server-id.{index}		UIID of the baremetal server.
baremetal-server-tag.{index}		Tag of the baremetal server.
server-ip.{index}	Required	List of backend server IP addresses (IPv4 or IPv6) the backend should forward traffic to
~~send-proxy-v2~~	Deprecated	Deprecated in favor of proxy_protocol field
timeout-server	Default: `5m`	Maximum allowed time for a backend server to process a request
timeout-connect	Default: `5s`	Maximum allowed time for establishing a connection to a backend server
timeout-tunnel	Default: `15m`	Maximum allowed tunnel inactivity time after Websocket is established (takes precedence over client and server timeout)
on-marked-down-action	One of: `on_marked_down_action_none`, `shutdown_sessions`	Action to take when a backend server is marked as down
proxy-protocol	One of: `proxy_protocol_unknown`, `proxy_protocol_none`, `proxy_protocol_v1`, `proxy_protocol_v2`, `proxy_protocol_v2_ssl`, `proxy_protocol_v2_ssl_cn`	Protocol to use between the Load Balancer and backend servers. Allows the backend servers to be informed of the client's real IP address. The PROXY protocol must be supported by the backend servers' software
failover-host		Scaleway Object Storage bucket website to be served as failover if all backend servers are down, e.g. failover-website.s3-website.fr-par.scw.cloud
ssl-bridging		Defines whether to enable SSL bridging between the Load Balancer and backend servers
ignore-ssl-server-verify		Defines whether the server certificate verification should be ignored
redispatch-attempt-count		Whether to use another backend server on each attempt
max-retries		Number of retries when a backend server connection failed
max-connections		Maximum number of connections allowed per backend server
timeout-queue		Maximum time for a request to be left pending in queue when `max_connections` is reached
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete a backend of a given Load Balancer

Delete a backend of a given Load Balancer, specified by its backend ID. This action is irreversible and cannot be undone.

Usage:

scw lb backend delete <backend-id ...> [arg=value ...]

Args:

Name		Description
backend-id	Required	ID of the backend to delete
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get a backend of a given Load Balancer

Get the full details of a given backend, specified by its backend ID. The response contains the backend's full configuration parameters including protocol, port and forwarding algorithm.

Usage:

scw lb backend get <backend-id ...> [arg=value ...]

Args:

Name		Description
backend-id	Required	Backend ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List the backends of a given Load Balancer

List all the backends of a Load Balancer, specified by its Load Balancer ID. By default, results are returned in ascending order by the creation date of each backend. The response is an array of backend objects, containing full details of each one including their configuration parameters such as protocol, port and forwarding algorithm.

Usage:

scw lb backend list [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
name		Name of the backend to filter for
order-by	One of: `created_at_asc`, `created_at_desc`, `name_asc`, `name_desc`	Sort order of backends in the response
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

List backend server statistics

List information about your backend servers, including their state and the result of their last health check.

Usage:

scw lb backend list-statistics <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
backend-id		ID of the backend
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Remove a set of servers for a given backend

For a given backend specified by its backend ID, remove the specified backend servers (identified by their IP addresses) so that it no longer forwards traffic to them.

Usage:

scw lb backend remove-servers <backend-id ...> [arg=value ...]

Args:

Name		Description
backend-id	Required	Backend ID
instance-server-id.{index}		UIID of the instance server.
instance-server-tag.{index}		Tag of the instance server.
use-instance-server-public-ip		Use public IP address of the instance instead of the private one
baremetal-server-id.{index}		UIID of the baremetal server.
baremetal-server-tag.{index}		Tag of the baremetal server.
server-ip.{index}	Required	List of IP addresses to remove from backend servers
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Define all backend servers for a given backend

For a given backend specified by its backend ID, define the set of backend servers (identified by their IP addresses) that it should forward traffic to. Any existing backend servers configured for this backend will be removed.

Usage:

scw lb backend set-servers <backend-id ...> [arg=value ...]

Args:

Name		Description
backend-id	Required	Backend ID
instance-server-id.{index}		UIID of the instance server.
instance-server-tag.{index}		Tag of the instance server.
use-instance-server-public-ip		Use public IP address of the instance instead of the private one
baremetal-server-id.{index}		UIID of the baremetal server.
baremetal-server-tag.{index}		Tag of the baremetal server.
server-ip.{index}	Required	List of IP addresses for backend servers. Any other existing backend servers will be removed
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Update a backend of a given Load Balancer

Update a backend of a given Load Balancer, specified by its backend ID. Note that the request type is PUT and not PATCH. You must set all parameters.

Usage:

scw lb backend update <backend-id ...> [arg=value ...]

Args:

Name		Description
backend-id	Required	Backend ID
name	Required	Backend name
forward-protocol	Required One of: `tcp`, `http`	Protocol to be used by the backend when forwarding traffic to backend servers
forward-port	Required	Port to be used by the backend when forwarding traffic to backend servers
forward-port-algorithm	Required One of: `roundrobin`, `leastconn`, `first`	Load balancing algorithm to be used when determining which backend server to forward new traffic to
sticky-sessions	Required One of: `none`, `cookie`, `table`	Defines whether to activate sticky sessions (binding a particular session to a particular backend server) and the method to use if so. None disables sticky sessions. Cookie-based uses an HTTP cookie to stick a session to a backend server. Table-based uses the source (client) IP address to stick a session to a backend server
sticky-sessions-cookie-name		Cookie name for cookie-based sticky sessions
~~send-proxy-v2~~	Deprecated	Deprecated in favor of proxy_protocol field
timeout-server	Default: `5m`	Maximum allowed time for a backend server to process a request
timeout-connect	Default: `5s`	Maximum allowed time for establishing a connection to a backend server
timeout-tunnel	Default: `15m`	Maximum allowed tunnel inactivity time after Websocket is established (takes precedence over client and server timeout)
on-marked-down-action	One of: `on_marked_down_action_none`, `shutdown_sessions`	Action to take when a backend server is marked as down
proxy-protocol	One of: `proxy_protocol_unknown`, `proxy_protocol_none`, `proxy_protocol_v1`, `proxy_protocol_v2`, `proxy_protocol_v2_ssl`, `proxy_protocol_v2_ssl_cn`	Protocol to use between the Load Balancer and backend servers. Allows the backend servers to be informed of the client's real IP address. The PROXY protocol must be supported by the backend servers' software
failover-host		Scaleway Object Storage bucket website to be served as failover if all backend servers are down, e.g. failover-website.s3-website.fr-par.scw.cloud
ssl-bridging		Defines whether to enable SSL bridging between the Load Balancer and backend servers
ignore-ssl-server-verify		Defines whether the server certificate verification should be ignored
redispatch-attempt-count		Whether to use another backend server on each attempt
max-retries		Number of retries when a backend server connection failed
max-connections		Maximum number of connections allowed per backend server
timeout-queue		Maximum time for a request to be left pending in queue when `max_connections` is reached
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Update a health check for a given backend

Update the configuration of the health check performed by a given backend to verify the health of its backend servers, identified by its backend ID. Note that the request type is PUT and not PATCH. You must set all parameters.

Usage:

scw lb backend update-healthcheck [arg=value ...]

Args:

Name		Description
port	Required	Port to use for the backend server health check
check-delay	Required	Time to wait between two consecutive health checks
check-timeout	Required	Maximum time a backend server has to reply to the health check
check-max-retries	Required	Number of consecutive unsuccessful health checks after which the server will be considered dead
backend-id	Required	Backend ID
check-send-proxy		Defines whether proxy protocol should be activated for the health check
mysql-config.user		MySQL user to use for the health check
pgsql-config.user		PostgreSQL user to use for the health check
http-config.uri		HTTP path used for the health check
http-config.method		HTTP method used for the health check
http-config.code		HTTP response code expected for a successful health check
http-config.host-header		HTTP host header used for the health check
https-config.uri		HTTP path used for the health check
https-config.method		HTTP method used for the health check
https-config.code		HTTP response code expected for a successful health check
https-config.host-header		HTTP host header used for the health check
https-config.sni		SNI used for SSL health checks
transient-check-delay	Default: `0.5s`	Time to wait between two consecutive health checks when a backend server is in a transient state (going UP or DOWN)
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

TLS certificate management commands

TLS certificate management commands.

Create an SSL/TLS certificate

Generate a new SSL/TLS certificate for a given Load Balancer. You can choose to create a Let's Encrypt certificate, or import a custom certificate.

Usage:

scw lb certificate create [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
name	Required Default: `<generated>`	Name for the certificate
letsencrypt-common-name		Main domain name of certificate (this domain must exist and resolve to your Load Balancer IP address)
letsencrypt-alternative-name.{index}		Alternative domain names (all domain names must exist and resolve to your Load Balancer IP address)
custom-certificate-chain		Full PEM-formatted certificate, consisting of the entire certificate chain including public key, private key, and (optionally) Certificate Authorities
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete an SSL/TLS certificate

Delete an SSL/TLS certificate, specified by its certificate ID. Deleting a certificate is irreversible and cannot be undone.

Usage:

scw lb certificate delete <certificate-id ...> [arg=value ...]

Args:

Name		Description
certificate-id	Required	Certificate ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get an SSL/TLS certificate

Get information for a particular SSL/TLS certificate, specified by its certificate ID. The response returns full details of the certificate, including its type, main domain name, and alternative domain names.

Usage:

scw lb certificate get <certificate-id ...> [arg=value ...]

Args:

Name		Description
certificate-id	Required	Certificate ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List all SSL/TLS certificates on a given Load Balancer

List all the SSL/TLS certificates on a given Load Balancer. The response is an array of certificate objects, which are by default listed in ascending order of creation date.

Usage:

scw lb certificate list [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
order-by	One of: `created_at_asc`, `created_at_desc`, `name_asc`, `name_desc`	Sort order of certificates in the response
name		Certificate name to filter for, only certificates of this name will be returned
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Update an SSL/TLS certificate

Update the name of a particular SSL/TLS certificate, specified by its certificate ID.

Usage:

scw lb certificate update <certificate-id ...> [arg=value ...]

Args:

Name		Description
certificate-id	Required	Certificate ID
name	Required	Certificate name
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Frontend management commands

Frontend management commands.

Create a frontend in a given Load Balancer

Create a new frontend for a given Load Balancer, specifying its configuration including the port it should listen on and the backend to attach it to.

Usage:

scw lb frontend create [arg=value ...]

Args:

Name		Description
name	Required Default: `<generated>`	Name for the frontend
inbound-port	Required	Port the frontend should listen on
lb-id	Required	Load Balancer ID (ID of the Load Balancer to attach the frontend to)
backend-id	Required	Backend ID (ID of the backend the frontend should pass traffic to)
timeout-client	Default: `5m`	Maximum allowed inactivity time on the client side
~~certificate-id~~	Deprecated	Certificate ID, deprecated in favor of certificate_ids array
certificate-ids.{index}		List of SSL/TLS certificate IDs to bind to the frontend
enable-http3		Defines whether to enable HTTP/3 protocol on the frontend
connection-rate-limit		Rate limit for new connections established on this frontend. Use 0 value to disable, else value is connections per second.
enable-access-logs		Defines whether to enable access logs on the frontend
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete a frontend

Delete a given frontend, specified by its frontend ID. This action is irreversible and cannot be undone.

Usage:

scw lb frontend delete <frontend-id ...> [arg=value ...]

Args:

Name		Description
frontend-id	Required	ID of the frontend to delete
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get a frontend

Get the full details of a given frontend, specified by its frontend ID. The response contains the frontend's full configuration parameters including the backend it is attached to, the port it listens on, and any certificates it has.

Usage:

scw lb frontend get <frontend-id ...> [arg=value ...]

Args:

Name		Description
frontend-id	Required	Frontend ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List frontends of a given Load Balancer

List all the frontends of a Load Balancer, specified by its Load Balancer ID. By default, results are returned in ascending order by the creation date of each frontend. The response is an array of frontend objects, containing full details of each one including the port they listen on and the backend they are attached to.

Usage:

scw lb frontend list [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
name		Name of the frontend to filter for
order-by	One of: `created_at_asc`, `created_at_desc`, `name_asc`, `name_desc`	Sort order of frontends in the response
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Update a frontend

Update a given frontend, specified by its frontend ID. You can update configuration parameters including its name and the port it listens on. Note that the request type is PUT and not PATCH. You must set all parameters.

Usage:

scw lb frontend update <frontend-id ...> [arg=value ...]

Args:

Name		Description
frontend-id	Required	Frontend ID
name	Required	Frontend name
inbound-port	Required	Port the frontend should listen on
backend-id	Required	Backend ID (ID of the backend the frontend should pass traffic to)
timeout-client	Default: `5m`	Maximum allowed inactivity time on the client side
~~certificate-id~~	Deprecated	Certificate ID, deprecated in favor of certificate_ids array
certificate-ids.{index}		List of SSL/TLS certificate IDs to bind to the frontend
enable-http3		Defines whether to enable HTTP/3 protocol on the frontend
connection-rate-limit		Rate limit for new connections established on this frontend. Use 0 value to disable, else value is connections per second.
enable-access-logs		Defines whether to enable access logs on the frontend
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

IP management commands

IP management commands.

Create an IP address

Create a new Load Balancer flexible IP address, in the specified Scaleway Project. This can be attached to new Load Balancers created in the future.

Usage:

scw lb ip create [arg=value ...]

Args:

Name		Description
project-id		Project ID to use. If none is passed the default project ID will be used
reverse		Reverse DNS (domain name) for the IP address
is-ipv6		If true, creates a Flexible IP with an ipv6 address
tags.{index}		List of tags for the IP
organization-id		Organization ID to use. If none is passed the default organization ID will be used
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete an IP address

Delete a Load Balancer flexible IP address. This action is irreversible, and cannot be undone.

Usage:

scw lb ip delete <ip-id ...> [arg=value ...]

Args:

Name		Description
ip-id	Required	IP address ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get an IP address

Retrieve the full details of a Load Balancer flexible IP address.

Usage:

scw lb ip get <ip-id ...> [arg=value ...]

Args:

Name		Description
ip-id	Required	IP address ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List IP addresses

List the Load Balancer flexible IP addresses held in the account (filtered by Organization ID or Project ID). It is also possible to search for a specific IP address.

Usage:

scw lb ip list [arg=value ...]

Args:

Name		Description
ip-address		IP address to filter for
project-id		Project ID to filter for, only Load Balancer IP addresses from this Project will be returned
ip-type	One of: `all`, `ipv4`, `ipv6`	IP type to filter for
tags.{index}		Tag to filter for, only IPs with one or more matching tags will be returned
organization-id		Organization ID to filter for, only Load Balancer IP addresses from this Organization will be returned
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Update an IP address

Update the reverse DNS of a Load Balancer flexible IP address.

Usage:

scw lb ip update <ip-id ...> [arg=value ...]

Args:

Name		Description
ip-id	Required	IP address ID
reverse		Reverse DNS (domain name) for the IP address
lb-id		ID of the server on which to attach the flexible IP
tags.{index}		List of tags for the IP
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Load balancer management commands

Load balancer management commands.

Create a Load Balancer

Create a new Load Balancer. Note that the Load Balancer will be created without frontends or backends; these must be created separately via the dedicated endpoints.

Usage:

scw lb lb create [arg=value ...]

Args:

Name		Description
project-id		Project ID to use. If none is passed the default project ID will be used
name	Required Default: `<generated>`	Name for the Load Balancer
description		Description for the Load Balancer
~~ip-id~~	Deprecated	ID of an existing flexible IP address to attach to the Load Balancer
assign-flexible-ip	Default: `true`	Defines whether to automatically assign a flexible public IP to the Load Balancer. Default value is `true` (assign).
assign-flexible-ipv6	Default: `false`	Defines whether to automatically assign a flexible public IPv6 to the Load Balancer. Default value is `false` (do not assign).
ip-ids.{index}		List of IP IDs to attach to the Load Balancer
tags.{index}		List of tags for the Load Balancer
type	Default: `LB-S` One of: `LB-S`, `LB-GP-M`, `LB-GP-L`	Load Balancer commercial offer type. Use the Load Balancer types endpoint to retrieve a list of available offer types
ssl-compatibility-level	One of: `ssl_compatibility_level_unknown`, `ssl_compatibility_level_intermediate`, `ssl_compatibility_level_modern`, `ssl_compatibility_level_old`	Determines the minimal SSL version which needs to be supported on the client side, in an SSL/TLS offloading context. Intermediate is suitable for general-purpose servers with a variety of clients, recommended for almost all systems (>= TLS1.2). Modern is suitable for services with clients that support TLS 1.3 and do not need backward compatibility (= TLS1.3). Old is compatible with a small number of very old clients and should be used only as a last resort (>= TLS1.0)
organization-id		Organization ID to use. If none is passed the default organization ID will be used
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete a Load Balancer

Delete an existing Load Balancer, specified by its Load Balancer ID. Deleting a Load Balancer is permanent, and cannot be undone. The Load Balancer's flexible IP address can either be deleted with the Load Balancer, or kept in your account for future use.

Usage:

scw lb lb delete <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	ID of the Load Balancer to delete
release-ip		Defines whether the Load Balancer's flexible IP should be deleted. Set to true to release the flexible IP, or false to keep it available in your account for future Load Balancers
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get a Load Balancer

Retrieve information about an existing Load Balancer, specified by its Load Balancer ID. Its full details, including name, status and IP address, are returned in the response object.

Usage:

scw lb lb get <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get usage statistics of a given Load Balancer

Get usage statistics of a given Load Balancer.

Usage:

scw lb lb get-stats <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
backend-id		ID of the backend
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List Load Balancers

List all Load Balancers in the specified zone, for a Scaleway Organization or Scaleway Project. By default, the Load Balancers returned in the list are ordered by creation date in ascending order, though this can be modified via the order_by field.

Usage:

scw lb lb list [arg=value ...]

Args:

Name		Description
name		Load Balancer name to filter for
order-by	One of: `created_at_asc`, `created_at_desc`, `name_asc`, `name_desc`	Sort order of Load Balancers in the response
project-id		Project ID to filter for, only Load Balancers from this Project will be returned
tags.{index}		Filter by tag, only Load Balancers with one or more matching tags will be returned
organization-id		Organization ID to filter for, only Load Balancers from this Organization will be returned
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Migrate a Load Balancer

Migrate an existing Load Balancer from one commercial type to another. Allows you to scale your Load Balancer up or down in terms of bandwidth or multi-cloud provision.

Usage:

scw lb lb migrate <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
type	Required One of: `LB-S`, `LB-GP-M`, `LB-GP-L`	Load Balancer type to migrate to (use the List all Load Balancer offer types endpoint to get a list of available offer types)
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Update a Load Balancer

Update the parameters of an existing Load Balancer, specified by its Load Balancer ID. Note that the request type is PUT and not PATCH. You must set all parameters.

Usage:

scw lb lb update <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
name	Required	Load Balancer name
description	Required	Load Balancer description
assign-flexible-ipv6		Automatically assign a flexible public IPv6 to the Load Balancer
ip-id		The IP ID to attach to the Load Balancer
tags.{index}		List of tags for the Load Balancer
ssl-compatibility-level	One of: `ssl_compatibility_level_unknown`, `ssl_compatibility_level_intermediate`, `ssl_compatibility_level_modern`, `ssl_compatibility_level_old`	Determines the minimal SSL version which needs to be supported on the client side, in an SSL/TLS offloading context. Intermediate is suitable for general-purpose servers with a variety of clients, recommended for almost all systems (>= TLS1.2). Modern is suitable for services with clients that support TLS 1.3 and do not need backward compatibility (= TLS1.3). Old is compatible with a small number of very old clients and should be used only as a last resort (>= TLS1.0)
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Wait for a load balancer to reach a stable state

Wait for a load balancer to reach a stable state. This is similar to using --wait flag.

Usage:

scw lb lb wait <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	ID of the load balancer you want to wait for.
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `pl-waw-1`, `nl-ams-1`	Zone to target. If none is passed will use default zone from the config
timeout	Default: `10m0s`	Timeout of the wait

Examples:

Wait for a load balancer to reach a stable state

scw lb lb wait 11111111-1111-1111-1111-111111111111

Load balancer types management commands

Load balancer types management commands.

List all Load Balancer offer types

List all the different commercial Load Balancer types. The response includes an array of offer types, each with a name, description, and information about its stock availability.

Usage:

scw lb lb-types list [arg=value ...]

Args:

Name		Description
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Private networks management commands

Private networks management commands.

Attach a Load Balancer to a Private Network

Attach a specified Load Balancer to a specified Private Network, defining a static or DHCP configuration for the Load Balancer on the network.

Usage:

scw lb private-network attach <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
private-network-id	Required	Private Network ID
ipam-ids.{index}		IPAM ID of a pre-reserved IP address to assign to the Load Balancer on this Private Network. In the future, it will be possible to specify multiple IPs in this field (IPv4 and IPv6), for now only one ID of an IPv4 address is expected. When null, a new private IP address is created for the Load Balancer on this Private Network.
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Detach Load Balancer from Private Network

Detach a specified Load Balancer from a specified Private Network.

Usage:

scw lb private-network detach <lb-id ...> [arg=value ...]

Args:

Name		Description
lb-id	Required	Load balancer ID
private-network-id	Required	Set your instance private network id
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List Private Networks attached to a Load Balancer

List the Private Networks attached to a given Load Balancer, specified by its Load Balancer ID. The response is an array of Private Network objects, giving information including the status, configuration, name and creation date of each Private Network.

Usage:

scw lb private-network list <lb-id ...> [arg=value ...]

Args:

Name		Description
order-by	One of: `created_at_asc`, `created_at_desc`	Sort order of Private Network objects in the response
lb-id	Required	Load Balancer ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Route rules management commands

Route rules management commands.

Create a route

Create a new route on a given frontend. To configure a route, specify the backend to direct to if a certain condition is matched (based on the value of the SNI field or HTTP Host header).

Usage:

scw lb route create [arg=value ...]

Args:

Name		Description
frontend-id		ID of the source frontend to create the route on
backend-id		ID of the target backend for the route
match.sni		Server Name Indication (SNI) value to match
match.host-header		HTTP host header to match
match.match-subdomains		If true, all subdomains will match
match.path-begin		Path begin value to match
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete a route

Delete an existing route, specified by its route ID. Deleting a route is permanent, and cannot be undone.

Usage:

scw lb route delete <route-id ...> [arg=value ...]

Args:

Name		Description
route-id	Required	Route ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get a route

Retrieve information about an existing route, specified by its route ID. Its full details, origin frontend, target backend and match condition, are returned in the response object.

Usage:

scw lb route get <route-id ...> [arg=value ...]

Args:

Name		Description
route-id	Required	Route ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List all routes

List all routes for a given frontend. The response is an array of routes, each one with a specified backend to direct to if a certain condition is matched (based on the value of the SNI field or HTTP Host header).

Usage:

scw lb route list [arg=value ...]

Args:

Name		Description
order-by	One of: `created_at_asc`, `created_at_desc`	Sort order of routes in the response
frontend-id		Frontend ID to filter for, only Routes from this Frontend will be returned
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Update a route

Update the configuration of an existing route, specified by its route ID.

Usage:

scw lb route update <route-id ...> [arg=value ...]

Args:

Name		Description
route-id	Required	Route ID
backend-id		ID of the target backend for the route
match.sni		Server Name Indication (SNI) value to match
match.host-header		HTTP host header to match
match.match-subdomains		If true, all subdomains will match
match.path-begin		Path begin value to match
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Subscriber management commands

Subscriber management commands.

Create a subscriber

Create a new subscriber, either with an email configuration or a webhook configuration, for a specified Scaleway Project.

Usage:

scw lb subscriber create [arg=value ...]

Args:

Name		Description
name	Required	Subscriber name
email-config.email		Email address to send alerts to
webhook-config.uri		URI to receive POST requests
project-id		Project ID to use. If none is passed the default project ID will be used
organization-id		Organization ID to use. If none is passed the default organization ID will be used
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Delete a subscriber

Delete an existing subscriber, specified by its subscriber ID. Deleting a subscriber is permanent, and cannot be undone.

Usage:

scw lb subscriber delete <subscriber-id ...> [arg=value ...]

Args:

Name		Description
subscriber-id	Required	Subscriber ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Get a subscriber

Retrieve information about an existing subscriber, specified by its subscriber ID. Its full details, including name and email/webhook configuration, are returned in the response object.

Usage:

scw lb subscriber get <subscriber-id ...> [arg=value ...]

Args:

Name		Description
subscriber-id	Required	Subscriber ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

List all subscribers

List all subscribers to Load Balancer alerts. By default, returns all subscribers to Load Balancer alerts for the Organization associated with the authentication token used for the request.

Usage:

scw lb subscriber list [arg=value ...]

Args:

Name		Description
order-by	One of: `created_at_asc`, `created_at_desc`, `name_asc`, `name_desc`	Sort order of subscribers in the response
name	Required	Subscriber name to search for
project-id		Filter subscribers by Project ID
organization-id		Filter subscribers by Organization ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`, `all`	Zone to target. If none is passed will use default zone from the config

Subscribe an existing subscriber to alerts for a given Load Balancer.

Usage:

scw lb subscriber subscribe [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
subscriber-id	Required	Subscriber ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Unsubscribe a subscriber from alerts for a given Load Balancer

Unsubscribe a subscriber from alerts for a given Load Balancer. The subscriber is not deleted, and can be resubscribed in the future if necessary.

Usage:

scw lb subscriber unsubscribe [arg=value ...]

Args:

Name		Description
lb-id	Required	Load Balancer ID
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config

Update a subscriber

Update the parameters of a given subscriber (e.g. name, webhook configuration, email configuration), specified by its subscriber ID.

Usage:

scw lb subscriber update <subscriber-id ...> [arg=value ...]

Args:

Name		Description
subscriber-id	Required	Subscriber ID
name	Required	Subscriber name
email-config.email		Email address to send alerts to
webhook-config.uri		URI to receive POST requests
zone	Default: `fr-par-1` One of: `fr-par-1`, `fr-par-2`, `nl-ams-1`, `nl-ams-2`, `nl-ams-3`, `pl-waw-1`, `pl-waw-2`, `pl-waw-3`	Zone to target. If none is passed will use default zone from the config