mpeg-ts-analyzer

August 19, 2026 · View on GitHub

Go Coverage Go Reference Release License Mentioned in Awesome Go

mpeg-ts-analyzer is an MPEG-2 Transport Stream analyzer (ISO/IEC 13818-1).

It parses TS packets and checks whether the stream conforms to the following requirements defined in the specification:

  • Max PCR interval should be no greater than 100 ms (ISO/IEC 13818-1, Section 2.7.2)
  • PCR-PTS max gap (end-to-end delay) should be no greater than 1000 ms
  • PTS/DTS anomalies — timestamps going backward, 33-bit wraparound, large forward jumps (splicing/ad insertion), or DTS later than PTS — are detected and reported (always on; silent when the stream is healthy)

In addition, it can dump various MPEG-2 TS internal structures for stream investigation:

  • TS header and payload
  • Adaptation field (including PCR)
  • PSI tables (PAT/PMT) with CRC32 validation
  • PMT ES info descriptors (ISO 639 language, registration, AVC/HEVC video, AAC audio, teletext, DVB subtitling)
  • PES header with PTS/DTS timestamps
  • PCR jitter analysis (per-interval deviation from the expected PCR)
  • continuity_counter validation with an always-on per-PID error summary

Both 188-byte TS packets and 192-byte M2TS packets (BDAV format with TP_extra_header) are supported. The packet size is auto-detected from the stream.

Note: The accuracy of the output is not guaranteed.

Install

Homebrew (macOS / Linux)

brew install small-teton/tap/mpeg-ts-analyzer

Linux packages (deb / rpm / apk)

Download .deb, .rpm, or .apk packages from the Releases page.

# Debian / Ubuntu
curl -LO https://github.com/small-teton/mpeg-ts-analyzer/releases/latest/download/mpeg-ts-analyzer_<version>_linux_amd64.deb
sudo dpkg -i mpeg-ts-analyzer_<version>_linux_amd64.deb

# RHEL / CentOS / Fedora
curl -LO https://github.com/small-teton/mpeg-ts-analyzer/releases/latest/download/mpeg-ts-analyzer_<version>_linux_amd64.rpm
sudo rpm -i mpeg-ts-analyzer_<version>_linux_amd64.rpm

# Alpine
curl -LO https://github.com/small-teton/mpeg-ts-analyzer/releases/latest/download/mpeg-ts-analyzer_<version>_linux_amd64.apk
sudo apk add --allow-untrusted mpeg-ts-analyzer_<version>_linux_amd64.apk

Pre-built binaries

Download from the Releases page. No additional tools are required.

Install with Go

If you have a Go environment (1.26+):

go install github.com/small-teton/mpeg-ts-analyzer/v2@latest

Usage

By default, mpeg-ts-analyzer dumps all timestamps (PCR/PTS/DTS), including the PCR interval and PCR-PTS gap. To dump more details, add the corresponding command-line flags.

Usage:
  mpeg-ts-analyzer [input file path] [flags]

Flags:
      --dump-adaptation-field   Dump TS packet adaptation_field detail.
      --dump-bitrate            Summarize per-PID average/peak bitrate (PCR time base) for the analyzed program.
      --dump-pcr-jitter         Analyze PCR jitter (per-interval deviation from the expected PCR).
      --dump-pes-header         Dump PES packet header detail.
      --dump-psi                Dump PSI(PAT/PMT) detail.
      --dump-timestamp          Dump PCR/PTS/DTS timestamps.
      --dump-ts-header          Dump TS packet header.
      --dump-ts-payload         Dump TS packet payload binary.
  -h, --help                    help for mpeg-ts-analyzer
      --limit int               Stop reading after this many bytes (0 = no limit).
      --list-programs           List every program (program_number, PMT PID, elementary streams) and exit.
      --offset int              Start reading from this byte offset.
      --program int             Analyze only this program_number (default: the sole program; a multi-program stream is listed instead).
      --version                 show mpeg-ts-analyzer version.

Multi-program transport streams

A single-program stream (a recording or an extracted service) is analyzed directly. A multi-program stream — e.g. a raw broadcast capture (ISDB-T carries a main service plus 1seg; BS/CS muxes carry many channels) — is not analyzed program-by-program by default: the tool lists the programs and stops, so you can pick one.

$ ./mpeg-ts-analyzer capture.ts
Detected PAT: 2 program(s)
Multiple programs detected; pass --program <program_number> to analyze one:
Program 1: PMT PID 0x1000, PCR PID 0x0100
PMT : Program Info : elementary_PID     : 0x100, stream_type : 0x1b (AVC video ...)
PMT : Program Info : elementary_PID     : 0x110, stream_type : 0x0f (AAC audio ...)
Program 2: PMT PID 0x1001, PCR PID 0x0110
PMT : Program Info : elementary_PID     : 0x120, stream_type : 0x02 (1seg video ...)

$ ./mpeg-ts-analyzer capture.ts --program 1     # analyze one program fully
$ ./mpeg-ts-analyzer capture.ts --list-programs # list only the programs, even when there is just one

Listing only parses each program's PMT (no PES analysis), so it stays lightweight.

Tip: For large files, dump options can produce a huge amount of output. Use --limit to restrict the byte range, or redirect output to a file to avoid losing the beginning of the output in your terminal scrollback:

mpeg-ts-analyzer large.ts --dump-ts-header --limit 1000000 > dump.txt

Options & output examples

Every flag has a full, annotated output example — TS header, PSI, timestamps, PCR jitter, and per-PID bitrate — in OPTIONS.md.

Why mpeg-ts-analyzer?

mpeg-ts-analyzer is purpose-built for one job: checking transport-layer timing compliance — the Max PCR interval and the PCR-PTS (end-to-end) gap — and reporting a direct pass/fail answer.

Compared to other tools

  • ffprobe / FFmpeg work at the elementary-stream (codec) level. They expose PTS/DTS but not the PCR, which lives in the transport layer (adaptation field). PCR interval and PCR-PTS gap checks are therefore out of reach — ffprobe simply never surfaces the PCR.
  • TSDuck is an excellent, comprehensive TS toolkit and it can obtain these values (e.g. tsp -P pcrextract dumps PCR/PTS/DTS to CSV). However, it hands you the raw timestamps — you still have to script the interval/gap computation and make the pass/fail decision yourself. TSDuck gives you the parts; it does not directly give you the answer.

mpeg-ts-analyzer instead gives you:

  • Spec-level field dump — Every field in TS headers, adaptation fields, PSI tables, and PES headers is printed exactly as defined in ISO/IEC 13818-1, making it easy to cross-reference with the specification.
  • Compliance checks out of the box — Max PCR interval (≤ 100 ms) and PCR-PTS gap (≤ 1000 ms) are validated automatically and reported as a direct result. No CSV, no scripting.

Which tool should I use?

  • Transport-layer timing compliance (Max PCR interval / PCR-PTS gap), or a lightweight pass/fail check you can drop into CI → mpeg-ts-analyzer. This is what it is built for.
  • Broad, general analysis of a stream — full PSI/SI tables (NIT/SDT/EIT/…), bitrate breakdown, service names, scrambling state, network information, deep TR 101 290 conformance monitoring → TSDuck is the far more capable tool, and we recommend it for that use case.

mpeg-ts-analyzer deliberately stays small and focused on the compliance check rather than duplicating what TSDuck already does well.

Sample TS files are included in sample_data/ for quick testing:

# 188-byte TS
ffmpeg -f lavfi -i "color=c=blue:s=320x240:d=5,format=yuv420p" \
       -f lavfi -i "anullsrc=r=48000:cl=stereo" \
       -t 5 -c:v mpeg2video -c:a mp2 -metadata:s:a:0 language=eng \
       -f mpegts sample_data/sample_188byte_video_mpeg2_320x240_25fps_audio_mp2_48000Hz.ts

# 192-byte M2TS
ffmpeg -f lavfi -i "color=c=red:s=320x240:d=2,format=yuv420p" \
       -f lavfi -i "anullsrc=r=48000:cl=stereo" \
       -t 2 -c:v mpeg2video -c:a mp2 -metadata:s:a:0 language=eng \
       -f mpegts -mpegts_m2ts_mode 1 sample_data/sample_192byte_video_mpeg2_320x240_25fps_audio_mp2_48000Hz.ts

Development

Test & Coverage

make setup      # configure git hooks (run once after clone)
make build      # build binary
make test       # run all tests
make coverage   # run tests with coverage report
make install    # install to $GOPATH/bin
make uninstall  # remove from $GOPATH/bin
make clean      # remove build/coverage artifacts

The version string is managed in the VERSION file and injected at build time.

Coverage is measured for bitbuffer and tsparser packages only. The CLI entry point (cmd, main.go) is excluded from coverage targets. Both packages should maintain 100% coverage.

A pre-push hook (make setup to enable) runs the build, test, and coverage checks before every push. Push is rejected if coverage drops below 100%.

Release

Releases are cut from the VERSION file. The tag is always v<VERSION>, so VERSION must contain a bare semver (X.Y.Z) with no leading v and no extra dots — a malformed value like .1.5.0 produces the invalid tag v.1.5.0 and fails the release.

  1. Bump the version in a PR. Edit VERSION (e.g. 1.4.0 → 1.5.0) and merge the PR to master. Do not tag by hand.
  2. Run the Release workflow. In GitHub → Actions → Release → Run workflow (workflow_dispatch, so only users with write access can start it). It reads VERSION, checks that v<VERSION> does not already exist, creates and pushes the tag, then runs GoReleaser in the same job to cross-compile for Linux, Windows, and Darwin and publish the GitHub Release with the archives attached.

That is the whole flow — bump VERSION in a PR, then trigger the workflow.

GoReleaser runs inside the Release job (not as a reaction to the tag push) because a tag pushed with the workflow's GITHUB_TOKEN does not start other workflow runs. The separate goreleaser workflow only fires for well-formed vX.Y.Z tags pushed by a user (e.g. make release, which tags locally instead of going through the Release workflow — prefer the workflow so releases are always cut from master).

If a release is ever created with a bad tag, delete the release and its tag before retrying — e.g. gh release delete v.1.5.0 --cleanup-tag.