BusNameMarker

Version: 0.0.1

Description

Adapted from CIM data models. Used to apply user standard names to topology buses. Typically used for bus/branch case generation. Associated with one or more terminals that are normally connected with the bus name. The associated terminals are normally connected by non-retained switches. For a ring bus station configuration, all busbar terminals in the ring are typically associated. For a breaker and a half scheme, both busbars would normally be associated. For a ring bus, all busbars would normally be associated. For a 'straight' busbar configuration, normally only the main terminal at the busbar would be associated.

Specification

Link to the interactive specification

Link to the specification

Enlace a la Especificación en español

Lien vers le spécification en français

Link zur deutschen Spezifikation

Link alla specifica

仕様へのリンク

链接到规范

사양 링크

Examples

Dynamic Examples generation

Link to the Generator of NGSI-LD normalized payloads compliant with this data model. Refresh for new values

Link to the Generator of NGSI-LD keyvalues payloads compliant with this data model. Refresh for new values

Link to the Generator of geojson feature format payloads compliant with this data model. Refresh for new values

PostgreSQL schema

Link to the PostgreSQL schema of this data model

Contribution

If you have any issue on this data model you can raise an issue or contribute with a PR

If you wish to develop your own data model you can start from contribution manual. Several services have been developed to help with:

• Test data model repository including the schema and example payloads, etc
• Generate PostgreSQL schema to help create a table, create type, etc