ExcIEEEDC3A

Version: 0.0.1

Description

Adapted from CIM data models. The class represents IEEE Std 421.5-2005 type DC3A model. This model represents represent older systems, in particular those dc commutator exciters with non-continuously acting regulators that were commonly used before the development of the continuously acting varieties. These systems respond at basically two different rates, depending upon the magnitude of voltage error. For small errors, adjustment is made periodically with a signal to a motor-operated rheostat. Larger errors cause resistors to be quickly shorted or inserted and a strong forcing signal applied to the exciter. Continuous motion of the motor-operated rheostat occurs for these larger error signals, even though it is bypassed by contactor action. Reference: IEEE Standard 421.5-2005 Section 5.3.

Specification

Link to the interactive specification

Link to the specification

Enlace a la Especificación en español

Lien vers le spécification en français

Link zur deutschen Spezifikation

Link alla specifica

仕様へのリンク

链接到规范

사양 링크

Examples

Dynamic Examples generation

Link to the Generator of NGSI-LD normalized payloads compliant with this data model. Refresh for new values

Link to the Generator of NGSI-LD keyvalues payloads compliant with this data model. Refresh for new values

Link to the Generator of geojson feature format payloads compliant with this data model. Refresh for new values

PostgreSQL schema

Link to the PostgreSQL schema of this data model

Contribution

If you have any issue on this data model you can raise an issue or contribute with a PR

If you wish to develop your own data model you can start from contribution manual. Several services have been developed to help with:

• Test data model repository including the schema and example payloads, etc
• Generate PostgreSQL schema to help create a table, create type, etc