LoadMotor

Version: 0.0.1

Description

Adapted from CIM data models. Aggregate induction motor load. This model is used to represent a fraction of an ordinary load as induction motor load. It allows load that is treated as ordinary constant power in power flow analysis to be represented by an induction motor in dynamic simulation. If = 0. or = , or = 0., only one cage is represented. Magnetic saturation is not modelled. Either a 'one-cage' or 'two-cage' model of the induction machine can be modelled. Magnetic saturation is not modelled. This model is intended for representation of aggregations of many motors dispersed through a load represented at a high voltage bus but where there is no information on the characteristics of individual motors. This model treats a fraction of the constant power part of a load as a motor. During initialisation, the initial power drawn by the motor is set equal to times the constant part of the static load. The remainder of the load is left as static load. The reactive power demand of the motor is calculated during initialisation as a function of voltage at the load bus. This reactive power demand may be less than or greater than the constant component of the load. If the motor's reactive demand is greater than the constant component of the load, the model inserts a shunt capacitor at the terminal of the motor to bring its reactive demand down to equal the constant reactive load. If a motor model and a static load model are both present for a load, the motor is assumed to be subtracted from the power flow constant load before the static load model is applied. The remainder of the load, if any, is then represented by the static load model.

Specification

Link to the interactive specification

Link to the specification

Enlace a la Especificación en español

Lien vers le spécification en français

Link zur deutschen Spezifikation

Link alla specifica

仕様へのリンク

链接到规范

Examples

Dynamic Examples generation

Link to the Generator of NGSI-LD normalized payloads compliant with this data model. Refresh for new values

Link to the Generator of NGSI-LD keyvalues payloads compliant with this data model. Refresh for new values

Link to the Generator of geojson feature format payloads compliant with this data model. Refresh for new values

PostgreSQL schema

Link to the PostgreSQL schema of this data model

Contribution

If you have any issue on this data model you can raise an issue or contribute with a PR

If you wish to develop your own data model you can start from contribution manual. Several services have been developed to help with:

• Test data model repository including the schema and example payloads, etc
• Generate PostgreSQL schema to help create a table, create type, etc