CooledBeam

Version: 0.0.1

Description

A cooled beam (or chilled beam) is a device typically used to cool air by circulating a fluid such as chilled water through exposed finned tubes above a space. Typically mounted overhead near or within a ceiling, the cooled beam uses convection to cool the space below it by acting as a heat sink for the naturally rising warm air of the space. Once cooled, the air naturally drops back to the floor where the cycle begins again.

Specification

Link to the interactive specification

Link to the specification

Enlace a la Especificación en español

Lien vers le spécification en français

Link zur deutschen Spezifikation

Link alla specifica

仕様へのリンク

链接到规范

사양 링크

Examples

Link to the example (keyvalues) for NGSI v2

Link to the example (keyvalues) for NGSI-LD

Link to the example (normalized) for NGSI-V2

Link to the example (normalized) for NGSI-LD

Link to the example (keyvalues) for NGSI v2 in CSV format

Link to the example (keyvalues) for NGSI-LD in CSV format

Link to the example (normalized) for NGSI-V2 in CSV format

Link to the example (normalized) for NGSI-LD in CSV format

Dynamic Examples generation

Link to the Generator of NGSI-LD normalized payloads compliant with this data model. Refresh for new values

Link to the Generator of NGSI-LD keyvalues payloads compliant with this data model. Refresh for new values

Link to the Generator of geojson feature format payloads compliant with this data model. Refresh for new values

PostgreSQL schema

Link to the PostgreSQL schema of this data model

Contribution

If you have any issue on this data model you can raise an issue or contribute with a PR

If you wish to develop your own data model you can start from contribution manual. Several services have been developed to help with:

• Test data model repository including the schema and example payloads, etc
• Generate PostgreSQL schema to help create a table, create type, etc