tmux-assistant-resurrect

Disclaimer: This project was entirely vibecoded (designed and implemented through conversation with AI coding assistants). It has been end-to-end tested in Docker with real CLI binaries (Claude/OpenCode/Codex/Pi/Oh My Pi) (350+ automated tests + full save/kill/restore lifecycle smoke test), but has limited real-world usage so far. Expect rough edges. Contributions and bug reports welcome.

Persist and restore AI coding assistant sessions across tmux restarts and reboots.

When your computer shuts down, tmux sessions are lost -- including any running Claude Code, OpenCode, Codex CLI, Pi, Oh My Pi, or Grok Build (xAI's grok CLI / TUI, not the community grok-cli) instances. This project hooks into tmux-resurrect to automatically save assistant session IDs, CLI flags, and environment variables, then re-launch them with the exact same configuration after a restore.

How it works

SAVE (every 5 min + manual prefix+Ctrl-s)
  tmux-resurrect saves pane layouts
    -> post-save hook inspects child processes of each pane
    -> detects assistants by binary name (claude, opencode, codex, pi, omp, grok)
    -> extracts session IDs via native hooks/plugins/process args
    -> writes assistant-sessions.json in tmux-resurrect's save dir

RESTORE (on tmux start or manual prefix+Ctrl-r)
  tmux-resurrect restores pane layouts
    -> post-restore hook reads assistant-sessions.json
    -> reconstructs full CLI invocation with saved flags + env vars
    -> sends resume commands to each pane, e.g.:
         ANTHROPIC_BASE_URL='...' claude --dangerously-skip-permissions --resume <id>
         opencode --verbose -s <session-id>
         codex --full-auto resume <session-id>
         pi --model sonnet --session <session-id>
         omp --profile work --resume <session-id>
         grok --resume <session-id>

Design

Detection is done via direct process inspection: the save script takes a single ps snapshot of all processes, finds children of each tmux pane shell, and matches known assistant binary names (claude, opencode, codex, pi, omp, grok).

Session ID extraction uses tool-native mechanisms (infrastructure plumbing):

Tool	Primary method	Fallback 1	Fallback 2	Notes
Claude Code	SessionStart hook state file (keyed by Claude PID)	--resume in process args	-	Claude overwrites its process title, so args fallback only works if args are visible
OpenCode	-s / --session in process args	Plugin state file	SQLite DB query (~/.local/share/opencode/opencode.db)	Go binary overwrites process title; DB fallback matches most recent session by cwd
Codex CLI	PID lookup in ~/.codex/session-tags.jsonl	resume in process args	-	Codex runs via Node.js, so args are always visible in ps
Pi	Session header lookup in ~/.pi/agent/sessions/--<cwd>--/*.jsonl	--session in process args	-	Session-file lookup is cwd-scoped and uses process-time scoring + dedup
Oh My Pi	Terminal breadcrumb + session JSONL lookup ($XDG_STATE_HOME/omp, $XDG_DATA_HOME/omp)	--resume / -r in process args	--session-dir / --profile scoped lookup	Distinct omp tool; no hook/plugin required
Grok	PID lookup in ~/.grok/active_sessions.json	-r / --resume <uuid> in process args	-	Registry records every live session (including a bare grok with no args) keyed by PID, so sessions sharing a cwd never collide; no hook/plugin required

Each tool has a primary and fallback extraction method. Fallbacks address the chicken-and-egg problem: after a restore, session IDs are in process args even before hooks/plugins have fired. The OpenCode SQLite database fallback provides version-resilient session ID extraction even when the plugin hasn't fired.

Prerequisites

• tmux (tested with 3.x)
• TPM (Tmux Plugin Manager)
• jq (used by save/restore scripts)
• At least one of: Claude Code, OpenCode, Codex CLI, Pi, Oh My Pi, Grok

Installation

Install TPM if you don't have it:

git clone https://github.com/tmux-plugins/tpm ~/.tmux/plugins/tpm

Add to your ~/.tmux.conf:

set -g @plugin 'tmux-plugins/tpm'
set -g @plugin 'tmux-plugins/tmux-resurrect'
set -g @plugin 'tmux-plugins/tmux-continuum'
set -g @plugin 'timvw/tmux-assistant-resurrect'

# Optional: restore terminal text in non-assistant panes after tmux restart.
# If enabled, the plugin automatically strips captured content for assistant
# panes so restore won't briefly flash stale TUI output before resuming.
# set -g @resurrect-capture-pane-contents 'on'

# Initialize TPM (must be last line)
run '~/.tmux/plugins/tpm/tpm'

Then inside tmux, press prefix + I (capital I). TPM will clone the plugins and automatically set up:

• tmux-resurrect + tmux-continuum settings
• Claude Code hooks in ~/.claude/settings.json
• OpenCode session-tracker plugin in ~/.config/opencode/plugins/
• Pi support via session-file lookup in ~/.pi/agent/sessions (no hook/plugin required)
• Oh My Pi support via terminal/session-file lookup in $XDG_STATE_HOME/omp, $XDG_DATA_HOME/omp, or ~/.omp (no hook/plugin required)
• Grok support via the ~/.grok/active_sessions.json registry (no hook/plugin required)

Uninstallation

Remove the @plugin 'timvw/tmux-assistant-resurrect' line from ~/.tmux.conf, then press prefix + alt + u inside tmux.

Usage

Automatic (recommended)

Once installed, everything runs automatically:

• tmux-continuum saves your tmux layout every 5 minutes
• Post-save hook collects assistant session IDs at each save
• On tmux server start, continuum auto-restores the layout
• Post-restore hook resumes each assistant with its saved session ID

Manual save/restore keybindings (tmux-resurrect defaults):

Key	Action
prefix + Ctrl-s	Save tmux state + assistant sessions
prefix + Ctrl-r	Restore tmux state + resume assistants

Repository structure

tmux-assistant-resurrect.tmux     # TPM plugin entry point
config/
  resurrect-assistants.conf       # tmux config reference template (not sourced automatically)
hooks/
  lib-claude-pid.sh               # Shared helper: walks process tree to find Claude PID
  claude-session-track.sh         # Claude SessionStart hook (writes session ID)
  claude-session-cleanup.sh       # Claude SessionEnd hook (removes state file)
  opencode-session-track.js       # OpenCode plugin (tracks session ID + cleanup)
scripts/
  lib-detect.sh                   # Shared library (detect_tool, pane_has_assistant, posix_quote)
  save-assistant-sessions.sh      # Resurrect post-save hook (process detection + session IDs)
  restore-assistant-sessions.sh   # Resurrect post-restore hook (resumes assistants)
test/
  Dockerfile                      # Docker image with tmux, jq, just, and real assistant CLIs
  bench-save-hook.sh              # Single-scenario save-hook benchmark runner (inside Docker)
  bench-matrix.sh                 # Docker benchmark matrix + CSV/Markdown summary generator
  run-tests.sh                    # Integration test suite
justfile                          # Install/uninstall/status/save/restore/test recipes

Testing

Automated tests (Docker)

The full test suite runs in Docker with real CLI binaries (no mocks):

just test

This builds a Docker image with tmux, jq, just, and the real @anthropic-ai/claude-code, opencode-ai, @openai/codex, and @earendil-works/pi-coding-agent npm packages, then runs the full test suite covering install, save, restore, uninstall, hooks, cleanup, TPM plugin installation, session ID extraction, POSIX quoting, process tree detection, upgrade-path migration, and regression scenarios. Pi runs with --offline flag (stays alive as TUI without API key). No API keys are needed — the tests exercise the process detection and session management layer, not the AI functionality.

Performance benchmarks (Docker)

Run a benchmark matrix and capture results as CSV + Markdown:

just benchmark

To compare your current checkout against another repo path (for example a worktree on main):

just benchmark base_repo=/path/to/base/worktree

Results are written to:

• test-results/benchmark.csv
• test-results/benchmark.md

On GitHub Actions (.github/workflows/test.yml), the benchmark matrix runs on every push/PR, publishes a step-summary table, and uploads the same CSV/Markdown files as the benchmark-results artifact.

Try it yourself

You can verify the full save → kill → restore cycle on your own machine using the normal TPM installation — no cloning or build tools needed.

Prerequisites: tmux, jq, and at least one of claude / opencode / codex / pi installed.

1. Install

Follow the Installation steps above (install TPM, add the plugin lines to ~/.tmux.conf, press prefix + I inside tmux).

2. Launch some assistants

Start assistants in separate tmux windows or sessions — just like you normally would:

# In one tmux window:
cd ~/src/my-project
claude

# In another window:
cd ~/src/other-project
opencode

# Or in another window:
cd ~/src/yet-another-project
pi

Work with them for a bit so the session hooks fire (Claude's SessionStart hook writes the session ID to disk automatically).

3. Save

Press prefix + Ctrl-s (the tmux-resurrect save keybinding). This saves the tmux layout and runs the assistant save hook, which detects running assistants and writes their session IDs to assistant-sessions.json inside tmux-resurrect's save directory.

Save location. The hook writes next to tmux-resurrect's own saves, resolved exactly as resurrect resolves it: @resurrect-dir if you set it, otherwise ~/.tmux/resurrect when that directory already exists, else the XDG default ${XDG_DATA_HOME:-~/.local/share}/tmux/resurrect. Set TMUX_RESURRECT_DIR to override. Examples below assume the XDG default.

You can inspect what was saved:

cat ~/.local/share/tmux/resurrect/assistant-sessions.json | jq .

Example output:

{
  "timestamp": "2026-02-15T20:34:28Z",
  "sessions": [
    {
      "pane": "my-project:0.0",
      "tool": "claude",
      "session_id": "01abc...",
      "cwd": "/home/user/src/my-project",
      "pid": "12345",
      "model": "claude-opus-4-6",
      "cli_args": "--dangerously-skip-permissions --model claude-opus-4-6",
      "env": {"tmux_pane": "%1", "shell": "/bin/zsh", "ANTHROPIC_BASE_URL": "https://proxy.internal"}
    },
    {
      "pane": "other-project:0.0",
      "tool": "opencode",
      "session_id": "ses_xyz...",
      "cwd": "/home/user/src/other-project",
      "pid": "12346",
      "model": "",
      "cli_args": "",
      "env": {"tmux_pane": "%2", "shell": "/bin/zsh"}
    }
  ]
}

4. Kill tmux (simulate a reboot)

tmux kill-server

Everything is gone — all sessions, all panes, all running assistants.

5. Restore

Start tmux again:

tmux

Then press prefix + Ctrl-r (the tmux-resurrect restore keybinding).

tmux-resurrect recreates your sessions, windows, and panes. The post-restore hook then reads the saved assistant sessions and sends the correct resume command to each pane, preserving the original CLI flags and environment:

• claude --dangerously-skip-permissions --model opus --resume <session-id>
• opencode -s <session-id>
• ANTHROPIC_BASE_URL='...' codex resume <session-id>
• pi --model sonnet --session <session-id>

If the session was launched with flags like --dangerously-skip-permissions or --model, those flags are captured from ps at save time and replayed on restore. Environment variables configured via @assistant-resurrect-capture-env are prepended to the resume command.

6. Verify

Check the restore log to see what happened:

cat ~/.local/share/tmux/resurrect/assistant-restore.log

You should see lines like:

[2026-02-15T20:34:31Z] restoring 2 assistant session(s)...
[2026-02-15T20:34:31Z] restoring claude in my-project:0.0 (session: 01abc..., cmd: claude --dangerously-skip-permissions --resume '01abc...')
[2026-02-15T20:34:32Z] restoring opencode in other-project:0.0 (session: ses_xyz..., cmd: opencode -s 'ses_xyz...')
[2026-02-15T20:34:33Z] restored 2 of 2 assistant session(s)

The save log is also available if you want to see what was detected:

cat ~/.local/share/tmux/resurrect/assistant-save.log

Troubleshooting

Symptom	Check
Save finds 0 sessions	Run ps -eo pid=,ppid=,args= | grep -E 'claude|opencode|codex|pi' to verify assistants are running
Session ID missing for Claude	Verify the hook is installed: jq '.hooks.SessionStart' ~/.claude/settings.json
Session ID missing for OpenCode	Launch with -s <id>, or verify the plugin: ls ~/.config/opencode/plugins/session-tracker.js
Session ID missing for Pi	Verify session files exist under ~/.pi/agent/sessions/--<cwd>--/*.jsonl and that pane cwd matches the Pi session cwd
Codex/OpenCode/Pi session ID missing (python3 methods)	The save hook auto-detects python3 in common locations. If your setup uses a non-standard path, set it in tmux: set-environment -g PATH "/your/python3/dir:$PATH"
Restore launches but assistant says "session not found"	The session ID may have expired. This is normal — start a fresh session and the next save will pick up the new ID
Assistants launch twice after restore	Make sure assistants are not listed in @resurrect-processes — the plugin handles all resuming via the post-restore hook
just test fails with Docker errors	Ensure Docker is running and you have network access (the image pulls npm packages)

Configuration

State directory

Session tracking files are written to a per-user temporary directory:

Platform	Default path
Linux (systemd)	$XDG_RUNTIME_DIR/tmux-assistant-resurrect (e.g., /run/user/1000/tmux-assistant-resurrect)
macOS	$TMPDIR/tmux-assistant-resurrect (e.g., /var/folders/.../T/tmux-assistant-resurrect)
Fallback	/tmp/tmux-assistant-resurrect (only if both XDG_RUNTIME_DIR and TMPDIR are unset)

This avoids permission conflicts on multi-user systems. Override with:

export TMUX_ASSISTANT_RESURRECT_DIR=/path/to/state

Note: state files are transient — they track running assistant PIDs and session IDs while tmux is active. The persistent sidecar JSON (assistant-sessions.json, in tmux-resurrect's save directory — see Save location above) is what survives reboots.

Environment variable capture and restoration

By default, the plugin captures TMUX_PANE and SHELL in hook/plugin-backed assistant state files (Claude/OpenCode). To capture additional environment variables, set a space-separated list in tmux.conf:

set -g @assistant-resurrect-capture-env 'VIRTUAL_ENV NODE_ENV CONDA_DEFAULT_ENV'

Captured variables are stored in the state file's env object and propagated to assistant-sessions.json. On restore, variables listed in @assistant-resurrect-capture-env are prepended to the resume command:

VIRTUAL_ENV='/home/user/.venv' claude --resume <session-id>

Built-in variables (TMUX_PANE, SHELL) are not restored — TMUX_PANE would be stale after restore, and SHELL is already in the environment. State files live in a user-only directory (mode 0700).

Note: Avoid capturing secrets (API keys, tokens). State files and the sidecar JSON persist to disk and may outlive the process they were captured from.

PATH in restricted environments (NixOS, systemd services)

When tmux runs as a systemd user service, the server inherits a stripped-down PATH that may not include python3. The save hook automatically checks common system locations (/run/current-system/sw/bin, /opt/homebrew/bin, /usr/local/bin, /usr/bin) and augments PATH if needed. This is a no-op when python3 is already on PATH.

If your python3 is in a non-standard location, the recommended fix is at the tmux level:

# In tmux.conf — ensures all hooks and plugins see the right PATH:
set-environment -g PATH "/your/custom/bin:/usr/local/bin:/usr/bin:/bin"

Or fix it in the systemd unit:

# ~/.config/systemd/user/tmux.service.d/override.conf
[Service]
Environment=PATH=/run/current-system/sw/bin:/usr/local/bin:/usr/bin:/bin

Continuum save interval

Edit config/resurrect-assistants.conf:

set -g @continuum-save-interval '5'  # minutes

Adding support for a new assistant

To add a new AI coding assistant:

1. Detection: Add a case pattern in detect_tool() in scripts/lib-detect.sh matching the tool's binary name
2. Session ID extraction: Add a get_<tool>_session() function
3. Restore command: Add a case branch in scripts/restore-assistant-sessions.sh with the tool's resume command
4. Session tracking (optional): If the tool doesn't expose its session ID in process args or a known file, create a hook/plugin similar to the existing ones
5. Update install/uninstall recipes in justfile if a new hook was added

How each component works

Claude Code hooks (hooks/claude-session-track.sh, hooks/claude-session-cleanup.sh)

Two hooks configured in ~/.claude/settings.json:

• SessionStart: Claude Code passes JSON on stdin (including session_id, model, source, permission_mode, transcript_path, and more). The hook merges the full JSON payload with plugin metadata (tool, ppid, timestamp, env) and writes it to $STATE_DIR/claude-<PID>.json. This means any new fields Claude adds in future versions are captured automatically.
• SessionEnd: Removes the state file when the Claude session exits, preventing stale entries.

Note: Claude Code sets process.title = 'claude', but on macOS arm64 (v2.1.44+) ps -eo args= still shows full args. The state file remains the primary source of session IDs, with process args as a fallback. CLI flags like --dangerously-skip-permissions are captured from ps by the save script's extract_cli_args() function.

OpenCode plugin (hooks/opencode-session-track.js)

An OpenCode plugin that listens for session.created, session.updated, and session.idle events. On each event, it captures the full session object (including model, title, and other metadata) along with init-time context (process.argv, client API surface) and writes it to $STATE_DIR/opencode-<PID>.json. This handles the case where a user switches sessions at runtime (via /sessions or Ctrl+x l). The plugin also cleans up its state file on process exit (SIGINT, SIGTERM).

Codex CLI

Codex natively writes PID-to-session mappings in ~/.codex/session-tags.jsonl. The save script reads this file directly -- no additional hook is needed.

Pi

Pi stores sessions as JSONL files under ~/.pi/agent/sessions/--<cwd>--/. The save hook reads session headers (type: "session", id, cwd, timestamp) and scores candidates by process lifetime + file mtime, with dedup across panes. If a pane was launched via restore, --session <id> in process args is used as a direct fallback.

Save hook (scripts/save-assistant-sessions.sh)

Runs after each tmux-resurrect save. Takes a single ps snapshot of all processes, finds children of each tmux pane's shell, and detects assistants by matching binary names. Then extracts session IDs using tool-specific methods (state files, process args, JSONL lookup, session-file lookup). Also captures:

• CLI flags (cli_args): extracted from ps args with the binary name and session/resume args stripped (e.g., --dangerously-skip-permissions --model opus)
• Model (model): from state file (preferred) or --model in args (fallback)
• Environment (env): from state file (captured by hooks/plugins)

Writes everything to assistant-sessions.json in tmux-resurrect's save directory (see Save location above).

Restore hook (scripts/restore-assistant-sessions.sh)

Runs after each tmux-resurrect restore. Reads the sidecar JSON and reconstructs the full CLI invocation for each assistant: <env_prefix> <binary> <cli_args> <resume_arg>. Sends the command to each pane via tmux send-keys. If enriched fields are missing (old-format JSON), falls back to bare resume commands.

Limitations

• Running state is not preserved: Assistants restart with their conversation history loaded, but any in-flight tool calls or pending operations are lost.
• First save after install (chicken-and-egg): On initial install, no session IDs exist yet. Assistants must complete at least one session (triggering the hooks) before their IDs can be saved. For Codex/OpenCode (-s) and Pi (--session), this is less of an issue since IDs are available in args after a restored launch.
• Claude process title: Claude Code sets process.title = 'claude', but on macOS arm64 (v2.1.44+) ps -eo args= still shows full args. CLI flags like --dangerously-skip-permissions are captured from ps at save time. If a future version hides args, cli_args will be empty and restore falls back to bare resume commands.
• OpenCode without plugin: If the OpenCode plugin isn't installed and the process was started without -s, the session ID cannot be detected.
• OpenCode DB fallback (same-cwd ambiguity): When the plugin state file is unavailable and no -s flag was used, the save script falls back to the OpenCode SQLite database, matching sessions by working directory. If multiple sessions share the same cwd, the most recently updated one is picked — which may not be the correct one for that specific pane.
• Pi session-file fallback (same-cwd ambiguity): Pi session lookup is cwd- scoped (~/.pi/agent/sessions/--<cwd>--). If multiple live Pi sessions share a cwd and look equally recent, one pane may be matched to the wrong ID.
• Process inspection on macOS: Uses ps -eo pid=,ppid= instead of pgrep -P due to reliability issues with pgrep on macOS.
• Pane matching after restore: tmux-resurrect preserves pane indices, so the restore hook targets the same session:window.pane addresses. If you manually rearrange panes between save and restore, the mapping may be wrong.

License

MIT