$Id: README,v 1.27 2013/10/16 03:29:11 evertonm Exp $
June 28, 2016 ยท View on GitHub
INTRODUCTION
fetchconfig is a Perl script for retrieving configuration of
multiple devices. It has been tested under Linux and Windows,
and currently supports a variety of devices, including Cisco
IOS, Cisco Catalyst, Cisco ASA, Cisco PIX, FortiGate
Firewalls, ProCurve, Alcatel Ethernet Routers (aka
Riverstone), Dell PowerConnect Switches, Terayon 3200/3500
CMTS, Datacom DmSwitch Switches, HP MSR Routers, Mikrotik
Routers, Tellabs MSR Routers, Juniper EX Switch JunOS, Oracle
Acme Packet, Audiocodes Mediant, Cisco IOS XR, NEC Univerge
IX.
LICENSE
fetchconfig - Retrieving configuration for multiple devices
Copyright (C) 2006 Everton da Silva Marques
fetchconfig is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2,
or (at your option) any later version.
fetchconfig is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public
License along with fetchconfig; see the file COPYING. If not,
write to the Free Software Foundation, Inc., 51 Franklin St,
Fifth Floor, Boston, MA 02110-1301 USA.
INSTALLATION (UNIX/Linux)
1. fetchconfig.pl expects a Perl interpreter at /usr/bin/perl.
2. fetchconfig.pl requires the Net::Telnet module.
(Use "cpan install Net::Telnet" if you don't have it.)
3. Unpack the fetchconfig tarball at a suitable
location. Example:
[ fetchconfig tarball available at /tmp/fetchconfig-0.0.tar.gz ]
cd /usr/local
tar xzf /tmp/fetchconfig-0.0.tar.gz
ln -s fetchconfig-0.0 fetchconfig
[ fetchconfig is now available under /usr/local/fetchconfig ]
INSTALLATION (Windows)
1. fetchconfig.pl expects to find a Perl interpreter in the PATH.
2. fetchconfig.pl requires the Net::Telnet module.
(Use "cpan install Net::Telnet" if you don't have it.)
3. Unpack the fetchconfig tarball at a suitable
location. From the command line, gzip and tar (links
below) can be used.
http://www.gzip.org
http://gnuwin32.sourceforge.net/packages/tar.htm
Alternatively, some commercial programs (such as WinZip)
offer a GUI.
Command Line Example:
[ fetchconfig tarball available at c:\temp\fetchconfig-0.0.tar.gz ]
c:
cd \
gzip -cd c:\temp\fetchconfig-0.0.tar.gz | tar xvf -
move fetchconfig-0.0 fetchconfig
[ fetchconfig is now available under c:\fetchconfig ]
USAGE
1. Edit the file "device_table.example" according your needs,
and save it as "device_table". Example:
[ fetchconfig available under /usr/local/fetchconfig ]
cd /usr/local/fetchconfig
cp device_table.example device_table
vi device_table
2. Run fetchconfig.pl, as in the following example:
[ fetchconfig available under /usr/local/fetchconfig ]
cd /usr/local/fetchconfig
./fetchconfig.pl -devices=device_table
The fetchconfig.pl script will scan the "device_table" file,
trying to retrieve the configuration for every device, storing
configuration files under the "repository".
DEVICE TABLE
The device table assigned with '-device=' switch is a text
file which supports two types of lines:
1. Default options lines assign default options to a device
model. The following example adds some default options to the
"cisco-ios" model:
#default model model-default-options
#
default: cisco-ios user=backup,pass=fran,enable=jose
2. Device lines define attributes of every device and
optionally assign device-specific options. The following
example define a device named "vpn-gw":
#model dev-unique-id device-host [device-options]
#
cisco-ios vpn-gw 192.168.0.1 keep=10,changes_only=1
The dev-unique-id must be:
a) an unique identifier across all devices;
b) a valid filesystem's directory name.
EMBEDDING DEVICE TABLE INTO COMMAND LINE
Valid lines for the device table file can also be passed
directly through the -line=string command line switch.
Example:
/path/to/fetchconfig.pl -line="default: tellabs-msr user=backup,pass=s&cr&t,timeout=10,keep=5,changes_only=0,fetch_timeout=1200,filename_append_suffix=.txt,repository=/path/to/repo" -line="tellabs-msr lab-router 10.0.0.1"
DEVICE SUPPORT
The following devices are known to be supported. This
is not a comprehensive list. Other devices and versions
are likely to work but have not been verified.
Model Name Devices/OS Supported
---------- ------------------------------------------------
cisco-cat CatOS switches
cisco-ios IOS routers
2500 series, 2600 series, 2800 series,
CS-516 (with show_cmd=wrterm option)
cisco-asa Cisco ASA firewalls
cisco-pix Cisco PIX firewalls
cisco-iosxr Cisco IOS XR
fortigate FortiOS 3.0
parks Parks 209R
riverstone Alcatel Ethernet Router 3100 (Riverstone RS3100)
terayon-os Terayon 3200/3500 CMTS
dmswitch Datacom DmSwitch
3com-msr 3Com MSR routers
mikrotik MikroTik routers
coriant-8600 Coriant 8600 Smart Router Series
tellabs-msr Tellabs MSR routers
junos Juniper EX Switch JunOS
acme Oracle Acme Packet
mediant Audiocodes Mediant
nec-univerge-ix NEC Univerge IX
OPTIONS
The modules CiscoIOS, CiscoCAT, CiscoASA and CiscoPIX
recognize the following options:
pass A mandatory option, specifies the login password.
user Specifies the login username. It can be omitted
for devices not requiring a login username.
enable Mandatory, specifies the enable password.
timeout Mandatory, how long to wait for TELNET responses
from devices.
fetch_timeout Optional. If given, will override the timeout
value used to fetch all the configuration lines.
It is useful for devices which spend several
seconds building the configuration.
repository Mandatory, specifies the base directory for
saving the configuration files.
keep Mandatory, the maximum number of config files
to retain for the device. When this limit is
reached, the older files are discarded.
changes_only Optional. Boolean. If specified as
changes_only=1, only new configurations are
saved. Otherwise, configurations are saved
whenever the script runs; if not defined as
changes_only=1, the script might possibly
retain multiple identical configuration files.
on_fetch_run Optional. Path to an external program to be
called whenever the configuration is fetched.
The following environmental variables are
passed to the program:
FETCHCONFIG_DEV_ID = device unique id
FETCHCONFIG_DEV_HOST = device hostname (or IP addr)
FETCHCONFIG_PREV = pathname to previous config,
undefined if none exists
FETCHCONFIG_CURR = pathname to current config
Example:
on_fetch_run=/usr/local/bin/mail_diff_to_admin.sh
Please notice that, if changes_only=1, the
backup file referenced to FETCHCONFIG_CURR
will be erased right after the external program
is finished. This option is available for all
modules.
on_fetch_cat Optional. Boolean. If specified as
on_fetch_cat=1, the currently fetched
configuration is issued to standard
output. This option is available for all
modules.
timezone Optional. If defined as timezone=hide, it will
supress timezone information from config filename.
filename_append_suffix
Optional. If defined, it is appended to the
generated filename. This option is available
for all modules.
Example: filename_append_suffix=.txt
Options specific to CiscoIOS:
show_cmd Optional. If specified, its value will replace
the usual "show run" command. This is necessary
for some older devices. It may be useful to
send alternative commands to capture the
configuration. To keep compatibility with
previous versions of fetchconfig, if specified
as show_cmd=wrterm, "write term" will be used
in place of the usual "show run" command.
The fortigate module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
repository Mandatory.
keep Mandatory.
timeout Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The parks module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
repository Mandatory.
keep Mandatory.
timeout Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
Options specific to Parks:
banner_timeout Optional. If given, will override the timeout
value used to wait for the 'login:' prompt.
It is useful since the Parks 209R spends
many seconds before issuing the initial
login prompt for TELNET connections.
The riverstone module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
enable Mandatory.
repository Mandatory.
keep Mandatory.
timeout Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The terayon-os module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
enable Mandatory.
repository Mandatory.
keep Mandatory.
timeout Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The dmswitch module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
repository Mandatory.
keep Mandatory.
timeout Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The 3com-msr module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
enable Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The mikrotik module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
enable Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The tellabs module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
enable Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The junos module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The acme module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Optional.
pass Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The mediant module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The nec-univerge-ix module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The cisco-iosxr module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
The coriant-8600 module recognizes the following options:
(See above cisco-ios/cisco-cat section for descriptions.)
user Mandatory.
pass Mandatory.
timeout Mandatory.
repository Mandatory.
keep Mandatory.
fetch_timeout Optional.
changes_only Optional.
on_fetch_run Optional.
on_fetch_cat Optional.
timezone Optional.
filename_append_suffix Optional.
-- END --