Inference Guide

Run all commands from the repository root through the Python entry point:

python -m src.demo.infer_batch_images [OPTIONS]

Modes

Mode	Encoder configuration	Default checkpoint	Prompt depth
rgb	RGB-only	checkpoints/infinisplat_rgb.ckpt	Not used
lidar	RGB + prompt-conditioned InfiniDepth	checkpoints/infinisplat_lidar.ckpt	Required

The selected checkpoint contains the full inference model. Encoder and decoder weights are not downloaded separately.

Input discovery

--input accepts one image or a directory. Supported image extensions are .jpg, .jpeg, .png, .bmp, and .webp. Directory entries are sorted to make batch selection deterministic.

Only files directly inside the selected directory are scanned. Use --limit N to process only the first N selected images. A limit of 0 means no cap.

When --input is omitted, each mode uses its bundled example directory:

rgb   -> examples/data/rgb_demo
lidar -> examples/data/lidar_demo

Depth pairing

By default, depth files are searched in the input directory and paired by filename stem. For a single-image input, this is the directory containing the image. For example:

data/frame_001.jpg
data/frame_001.npy

Run this pair with:

python -m src.demo.infer_batch_images \
  --mode lidar \
  --input data/frame_001.jpg

or to process all images and depths in a directory:

python -m src.demo.infer_batch_images \
  --mode lidar \
  --input data

---

To explicitly select the depth file for a single image, use --prompt-depth:

python -m src.demo.infer_batch_images \
  --mode lidar \
  --input /path/to/frame_001.jpg \
  --prompt-depth /path/to/frame_001.npy

To keep depth files in a separate directory, set --prompt-depth-dir; each image is still paired with a depth file that has the same stem:

python -m src.demo.infer_batch_images \
  --mode lidar \
  --input /path/to/images \
  --prompt-depth-dir /path/to/depths

--prompt-depth applies the same file to every selected image, so it should normally be used only with a single-image input. Candidate extensions are tried in this order when pairing automatically: .npz, .npy, .h5, .hdf5, .exr.

Depth input format

Prompt depth must be spatially aligned with the RGB image and use larger values for farther points. Metric scale is optional: scale-ambiguous depth maps are also supported, while metric input preserves the scene scale in the exported 3DGS. Disparity or inverse depth must be converted to depth first.

Depth arrays should use shape [H, W]. Plain arrays and dense maps are accepted; .npz files may instead store a sparse mask and value pair. Valid values must be finite and strictly between 1 and 100 after decoding, so relative depth in [0, 1] must be rescaled first. At most 1500 valid samples are used as prompts.

Camera intrinsics

Camera parameters are resolved in the following order:

1. --intrinsics-file: a YAML or JSON file containing a 3 x 3 pixel-space matrix.
2. --focal-px: focal length in pixels; fx = fy, with a centered principal point.
3. --focal-mm: 35 mm full-frame-equivalent focal length.
4. Image EXIF focal length.
5. A fixed 30 mm full-frame-equivalent fallback.

The three command-line overrides are mutually exclusive. One override is reused for every image in a batch.

An intrinsics file may place the matrix at either intrinsics_px or camera.intrinsics_px:

intrinsics_px:
  - [1200.0, 0.0, 768.0]
  - [0.0, 1200.0, 576.0]
  - [0.0, 0.0, 1.0]

Values must describe the original input image in pixels. The loader scales the matrix automatically during preprocessing.

Optional video render resolution

When the optional gsplat package is installed, videos render at the original image resolution when possible. Very large frames are scaled down to a maximum long edge of 3840 pixels and a maximum area of 3840 x 2160 pixels. Each video contains 60 frames at 10 FPS.

Outputs and resume behavior

The default output root is outputs/demo/<mode>. Every image receives its own directory:

outputs/demo/rgb/example/
├── example.ply
├── example.mp4   # optional: requires gsplat
└── example.html  # optional: requires splat-transform

PLY export is always enabled and does not require gsplat. Video export is enabled by default when gsplat is installed; otherwise it is skipped with a warning. Pass --no-video to disable it explicitly. HTML export is independent of gsplat and is skipped with a warning when the optional splat-transform executable is unavailable.

If every requested artifact already exists, the case is skipped. If the PLY and requested video exist but HTML is missing, only HTML conversion runs. Pass --overwrite to recompute requested outputs.

The HTML converter reads config/viewer_settings.json directly. It does not generate a hidden viewer-settings file.

Common options

Option	Description
--mode {rgb,lidar}	Select the model mode.
--checkpoint PATH	Override the checkpoint selected by the mode.
--input PATH	Process one image or a directory.
--output-dir PATH	Override outputs/demo/<mode>.
--limit N	Process at most N selected images; 0 means all.
--overwrite	Recompute outputs that already exist.
--device DEVICE	Override automatic device selection, for example cuda:0.
--intrinsics-file PATH	Use a 3 x 3 pixel-space intrinsics matrix.
--focal-px VALUE	Use a focal length in pixels.
--focal-mm VALUE	Use a full-frame-equivalent focal length in millimeters.
--prompt-depth PATH	Use one prompt-depth file.
--prompt-depth-dir PATH	Pair depth files by image stem.
--disable-floater-filter	Keep Gaussians removed by the final floater filter.
--no-video	Skip MP4 rendering.
--no-export-html	Skip HTML viewer export.

Print the authoritative option list with:

python -m src.demo.infer_batch_images --help